Numerical Study on an Applicable Underground Mining Method for Soft Extra-Thick Coal Seams in Thailand
- 1 Department of Earth Resources Engineering, Kyushu University, Fukuoka City, Japan
- 2 Department of Earth Resources Engineering, Kyushu University, Fukuoka City, Japan
- 3 Department of Earth Resources Engineering, Kyushu University, Fukuoka City, Japan
- 4 Department of Earth Resources Engineering, Kyushu University, Fukuoka City, Japan
Abstract
The EGAT Mae Moh Mine is the largest open pit lignite mine in Thailand and it produces lignite about 16 million tons annually. In the near future, the pit limit of the mine will be reached and underground mine will then be developed through the open pit in the depth of 400 - 600 m from the surface. However, due to the challenges for underground mining such as poor geological conditions, extra thickness (20 - 30 m) of coal seams, and weak mechanical properties of coal seams and the surrounding rock, the success possibility of underground mining and an applicable underground mining method is being investigated at the present. The paper discusses the applicability of multi-slice bord-and-pillar method for the soft extra thick coal seams in the Mae Moh mine by means of numerical analyses using the 3D finite difference code “FLAC3D”.
- R. D. Singh, “Principles and Practices of Modern Coal Mining,” New Age International (P) Ltd., New Delhi, 1997, pp. 249-285.
- M. K. Ozfirat, F. Simsir and A. Gonen, “A Brief Comparison of Longwall Methods Used at Mining of Thick Coal Seams,” Proceedings of the 19th International Mining Congress and Fair of Turkey, Turkey, 9-12 June 2005, pp. 141-144.
- H. Furukawa, K. Matsui and H. Shimada, “The Present Situation and Issues in Coal Mining in India,” Journal of the Mining and Materials Processing Institute of Japan, Vol. 121, No. 9, 2005, pp. 446-455. doi:10.2473/shigentosozai.121.446
- EGAT, “Mae Moh Mine Geotechnical and Slope Stability,” Powerpoint Slides and Reports, 2011.
- P. Doncommul, P. Pimklang, N. Mungpayabal and A. Chaiwan, “Reviews of Slope Failure in Lowwall Area 3 of Mae Moh Mine,” Fuenkajorn and Phienwei, Eds., Rock Mechanics, 2011, pp. 219-227.
- K. Matsui, H. Shimada, T. Sasaoka and H. Furukawa, “Some Consideration in Underground Mining Systems for Extra-Thick Coal Seam,” Coal International, Vol. 259, No. 2, 2011, pp. 38-41.
- M. L. Jeremic, “Strata Mechanics in Coal Mining,” A. A. Balkema Publishers, Leiden, 1985.
- Itasca Consulting Group, Inc., “Flac3D Command Reference,” Mill Place, Minneapolis, 2003, p. 141.
- J. R. Barrett, M. A. Coulthard and R. M. Dight, “Determination of Fill Stability,” Mining with Backfill—12th Canadian Rock Mechanics Symposium, CIM Special Vol. 19, Sudbury, 23-25 May, 1978, pp. 85-91.
- D. R. Tesarik, J. B. Seymour, T. R. Yanske and R. W. Mckibbin, “Stability Analysis of a Backfilled Room-andPillar Mine,” Report of Investigations, United States Bureau of Mines, 1995, pp. 1-26.
- T. Grice, “Underground Mining with Backfill,” The 2nd Annual Summit-Mine Tailings Disposal System, Brisbane, 24-25 November 1998, pp. 1-14.
- K. Matsui, H. Shimada, S. Kramadibrata and M. Zrai, “Some Considerations of Highwall Mining Systems in Coal Mines,” Proceedings of the 17th International Mining Congress and Exhibition of Turkey, Ankara, 19-22 June 2001, pp. 269-276.