Measurement of the Lubricant Properties Using Hall Effect Sensor: A Study on Contamination and Viscosity
- 1 Department of Intelligent Mechanical Engineering, Faculty of Engineering, Fukuoka Institute of Technology, Fukuoka, Japan
- 2 Department of Intelligent Mechanical Engineering, Faculty of Engineering, Fukuoka Institute of Technology, Fukuoka, Japan
Abstract
This study proposes the development of contamination measurement for industrial machines based on magnetic field method. A permanent magnet was used to generate the 0.17 T magnetic fields and Hall Effect sensor was applied to measure the contamination level of metal particles in industrial machine lubricant during operation time and to predict the replacement period if the lubricant condition does not meet the standard (NAS 1638). Contamination level of metal particles was directly related to the output voltage of Hall Effect sensor. When there was any movement of metal particles to the permanent magnet, the measured result was then transferred to a computer for analysis. This methodology could be applied to experiment the conditions of used lubricant for assessing the contamination and the metal particle remaining in the tank or inside the pipe of the machine as well as the conditions of car lubricant and other lubricants used in industrial processes.
- M. H. Jones, “Tribology—A Key Element in Condition Monitoring,” Proceedings of Condition Monitoring, Oxford, 2011, pp. 20-29.
- Q. Meng, “Study on the On-line Oil Monitor Based on Optical Fiber Sensor,” Chinese Hydraulics & Pneumatics, Vol. 5, 2006, pp. 34-37.
- B. W. Wilson and G. Silvernail, “Automated In-Line Machine Fluid Analysis for Marine Diesel and Gas Turbine Engines,” International Condition Monitoring Conference, Mobile, 2002, pp. 129-135.
- R. Guojun, T. Derong and Q. Jinyu, “An On-Line Monitoring Technique for Contamination Degree of Diesel Engine Lubricating Oil,” Internal Combustion Engines, Vol. 32, 2005, pp. 36-38.
- F. Buiochi, R. T. Higuti, C. M. Furukawa and J. C. Ada-mowski, “Ultrasonic Measurement of Viscosity of Liquids,” IEEE Ultrasonics Symposium, Vol. 1, San Juan, 22-25 October 2000, pp. 525-528. doi:10.1109/ULTSYM.2000.922604
- C. Lou and D. Xing, “Photoacoustic Measurement of Liquid Viscosity,” IEEE Applied Physics Letters, Vol. 96, No. 21, 2010, Article ID: 211102. doi:10.1063/1.3435462
- D. C. Crew, P. G. McCormick and R. Street, “Measurement of Magnetic Viscosity in NdFeB,” IEEE Transactions on Magnetics, Vol. 32, No. 5, 1996, pp. 4356-4358. doi:10.1109/20.538867
- M. Bano, I. Strharsky, and I. Hrmo, “A Viscosity and Density Meter with a Magnetically Suspended Rotor,” IEEE Scientific Instruments, Vol. 74, No. 11, 2003, pp. 4788-4793. doi:10.1063/1.1614881
- Y. Dingxin, Z. Xiaofei, H. Zheng, and Y. Yongmin, “Oil Contamination Monitoring Based on Dielectric Constant Measurement,” Measuring Technology and Mechatronics Automation, Zhangjiajie, 2009, pp. 249-252.
- A. Agoston, C. Otsch, J. Zhuravleva and B. Jakoby, “An IR-Absorption Sensor System for the Determination of Engine Oil Deterioration,” Proceedings of IEEE on Sensors, Vol. 1, 2004, pp. 463-466. doi:10.1109/ICSENS.2004.1426200
- Z. Pang, N. Shi, G. Meng and W. Li, “Development of In-Line Oil Contamination Sensor for Lubricant of Scraper Conveyor Reducer,” 9th International Conference on Electronic Measurement & Instruments (ICEMI'09), Beijing, 2009.
- E. Ramsden, “Hall-Effect Sensor: Theory and Applications,” Elsevier, Burlington, 2006.
- C. Chaiyachit, S. Satthamsakul, W. Sriratana and T. Suesut, “Hall Effect Sensor for Measuring Metal Particles in Lubricant,” International Multi Conference of Engineers and Computer Scientists 2012 (IMECS 2012), Hong Kong, 14-16 March 2012, pp. 894-897.