Testing of the Ultra-Micro Gas Turbine Devices (1 - 10 kW) for Portable Power Generation at University of Roma 1: First Tests Results
- 1 Department of Mechanical and Aerospace Engineering, Sapienza—University of Roma, Roma, Italy
- 2 Department of Mechanical and Aerospace Engineering, Sapienza—University of Roma, Roma, Italy
- 3 Department of Mechanical and Aerospace Engineering, Sapienza—University of Roma, Roma, Italy
- 4 Department of Mechanical and Aerospace Engineering, Sapienza—University of Roma, Roma, Italy
Abstract
The ever increasing development of portable electronics has led to a higher demand for compact and reliable power sources. Significant resources are being presently dedicated to the study of micro machined gas turbines, because of their remarkable power density. The paper reports the procedures and the results of a series of tests conducted at the Department of Mechanical & Aerospace Engineering of University of Roma 1, to obtain the map of an ultra-micro gas turbine device, and the head losses and the combustion efficiency of the corresponding ultra-micro combustion chamber, fed by a mixture of butane and propane. This work is a part of a research aimed at the conception, design and prototyping of an ultra-micro thermo-electrical device for portable power generation. The novelty of the research consists in the fact that the thermal engine is a (ultra-micro) gas turbine set. In a subsequent stage, several different configurations have been assessed to select the most proper geometry and structural characteristics of the most relevant components (radial compressor, radial turbine, combustion chamber, electric motor and generator, bearings, regenerative heat exchanger).
- A. H. Epstein “Millimeter-Scale, Mems Gas Turbine Engines,” Proceedings of ASME Turbo Expo 2003 on Power for Land, Sea, and Air, Atlanta, 16-19 June 2003, 28 p.
- A. H. Epstein, S. D. Senturia, G. Anathasuresh, A. Ayon, K. Breuer, K.-S. Chen, F. F. Ehrich, G. Gauba, R. Ghodssi, C. Groshenry, S. A. Jacobson, J. H. Lang, C.-C. Lin, A. Mehra, J. O. Mur Miranda, S. Nag1e, D. J. Orr, E. Piekos, M. A. Schmidt, G Shir1ey, S. M. Spearing, C. S. Tan, Y.-S. Tzeng and I. A. Waitz, “Power Mems and Microengines,” International Conference on Solid State Sensors and Actuators, Chicago, 16-19 June 1997, pp. 753-756.
- M. Ishihama, Y. Sakai, K. Matsuzuki and T. Hikone, “Structural Analysis of Rotating Parts of an Ultra Micro Gas Turbine,” Proceedings of the International Gas Turbine Congress, Tokyo, 2-7 November 2003, 4 p.
- J. Peirs, T. Waumans, P. Vleugels, F. Al-Bender, T. Stevens, T. Verstraete, S. Stevens, R. D’hulsts, D. Verstraete, R. Van den Braembussche, J. Driesen, R. Puers, P. Hendrick, M. Baelmans and D. Reynaerts, “Micro Power Generation Based on Micro Gas Turbines: A Challenge,” Proceedings of Institution of Mechanical Engineers, Vol. 221, Part C, pp. 489-497.
- R. Capata and E. Sciubba, “Further Development and Preliminary Testing of the α—Prototype of an Ultra-Micro Gas Turbine for Portable Power Generation,” Proceedings of IMECE 2008 Conference, Boston, 2-7 November 2008.
- R. Capata and E. Sciubba, “Design and Performance Prediction of a Ultra-Micro Gas Turbine for Portable Power Generation,” Proceedings of IMECE 2007 Conference, Seattle, 11-16 November 2007.
- G. S. Caveeiro, “Ultra Micro Gas Turbines Analysis,” M. Thesis, Sapienza—University of Roma, Roma, 2006.
- Y. Wang, M. Wu, R. A. Yetter and V. Yang, “An Integrated Experimental and Numerical Study of Meso Scale Vortex Combustor Dynamics,” 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, 10-13 January 2005. http://arc.aiaa.org/doi/abs/10.2514/6.2005-941