Analysis of the Manufactured Tolerances with the Three-Dimensional Method of Angular Chains of Dimensions Applied to a Cylinder Head of Car Engine
- 1
- 2
- 3
- 4
- 5
Abstract
This paper proposes an analysis method of the manufactured tolerances applied to a cylinder head of car engine. This method allows to determine the manufacturing tolerances in the case of angular chains of dimensions and to check its correspondence with the functional tolerances. The objective of this work is to analyze two parameterized functions: the angular defect Δα and the projected length lg of the toleranced surface. The angular defects are determined from the precision of the machine tools, we consider only the geometrical defects (position and orientation of surfaces), making the assumption that the form defects are negligible. The manufactured defect is determined from these two parameterized functions. Then it will be compared with the functional condition in order to check if the selected machining range allows, at end of the manufacturing process, to give a suitable part.
- F. Germain, D. Denimal and M. Giordano, “A Method for Three Dimensional Tolerance Analysis and Synthesis Applied to Complex and Precise Assemblies,” in IFIP International Federation for Information Processing, Volume 260, Mi-cro-Assembly Technologies and Applications, Springer, Boston, 2008, pp. 55-65.
- F. Villeneuve and F. Vignat, “Manufac-turing Process Simulation for Tolerance Analysis and Synthe-sis,” Proceedings of IDMME, 2004, Bath, 10 pages.
- M. H. Kyung and E. Sacks, “Nonlinear Kinematic Tolerance Analysis of Planar Mechanical Systems,” Computer Aided Design, Vol. 35, No. 10, 2003, pp. 901-911.
- R. J. Gerth and W. M. Hancock, “Computer Aided Tolerance Analysis for Improved Process Control,” Internationl Journal of Computers and In-dustrial Engineering, Vol. 38, No. 1, 2000, pp. 1-19.
- Z. Shen, G. Ameta, J. J. Shah and J. K. Davidson, “A Comparative Study of Tolerance Analysis Methods,” Journal of Computing and Information Science in Engineering, Vol. 5, No. 3, 2005, pp. 274-284.
- J. Hu, G. Xiong and Z. Wu, “A variational Geometric Constraints Network for a Tolerance Types Specifica-tion,” International Journal of Advanced Manufacture Technology, Vol. 24, No. 3-4, 2004, pp. 214-222.
- U. Roy and B. Li, “Representation and Interpretation of Geometric Tolerances for Polyhedral Objects,” Computer Aided Design, Vol. 31, No. 4, 1999, pp. 273-285.
- J. Y. Dantan, J. Bru-yere, J. P. Vincent and R. Bigot, “Vectorial Tolerance Allocation of Bevel Gear by Discrete Optimization,” Mechanism and Machine Theory, Vol. 43, No. 11, 2008, pp. 1478-1494.
- E. Ballot and P. Bourdet, “A Computation Method for the Conse-quences of Geometric Errors in Mechanisms,” Proceedings of CIRP Seminar on Computer Aided Tolerancing, Toronto, Can-ada, April 1997, pp. 197-207.
- M. Giordano, S. Samper and J. P. Petit, “Tolerance Analysis and Synthesis by Means of Deviation Domains, Axi- Symmetric Cases” of the 9th CIRP International Seminar on Computer Aided Tolerancing, Tempe (US), April, 2005, pp. 85-94.
- A. Mujezinovic, J. K. Davidson and J. J. Shah, “A New Mathematical Model for Geometric Tolerances as Applied to Polygonal Faces,” Trans-action of the ASME, Journal of Mechanical Design, Vol. 126, No. 4, 2004, pp. 504-518.
- J. P. Petit, S. Samper and M. Giordano, “Minimum Clearance for Tolerance Analysis of a Vacuum Pump,” Proceedings of the 8th CIRP seminar on computer aided design, Chalrotte (US), 2003, pp. 43-51.