Remote Laser Welding with High Power Fiber Lasers — Oak Academic Publishing
Research ArticleOpen AccessGoogle Scholar indexed
Remote Laser Welding with High Power Fiber Lasers
Laboratory of Welding Technology and Laser Processing, Department of Mechanical Engineering, Lappeenranta University of Technology, Lappeenranta, Finland
,
Laboratory of Welding Technology and Laser Processing, Department of Mechanical Engineering, Lappeenranta University of Technology, Lappeenranta, Finland
,
Laboratory of Welding Technology and Laser Processing, Department of Mechanical Engineering, Lappeenranta University of Technology, Lappeenranta, Finland
,
Laboratory of Welding Technology and Laser Processing, Department of Mechanical Engineering, Lappeenranta University of Technology, Lappeenranta, Finland
1 Laboratory of Welding Technology and Laser Processing, Department of Mechanical Engineering, Lappeenranta University of Technology, Lappeenranta, Finland
2 Laboratory of Welding Technology and Laser Processing, Department of Mechanical Engineering, Lappeenranta University of Technology, Lappeenranta, Finland
3 Laboratory of Welding Technology and Laser Processing, Department of Mechanical Engineering, Lappeenranta University of Technology, Lappeenranta, Finland
4 Laboratory of Welding Technology and Laser Processing, Department of Mechanical Engineering, Lappeenranta University of Technology, Lappeenranta, Finland
The introduction of the high power fiber laser with brilliant beam quality has enabled the rapid development of remote laser welding (RLW). This paper presents a theoretical review of remote laser welding. As a promising technology, RLW offers increased flexibility, high operational speed, and reduced cycle time to process a wide range of workpieces. This study presents the typical characteristics of RLW with high power fiber lasers. It also investigates the influence of process parameters such as laser power, welding speed, shielding gas supply, beam inclination and focal position on the weld seam quality.
G. Tsoukantas, A. Stournaras and G. Chryssolouris, “Ex perimental Investigation of Remote Laser Welding with CO2 and Nd: YAG Laser-Based Systems,” Journal of Laser Applications, Vol. 20, No. 1, 2008, pp. 50-58. doi:10.2351/1.2832400
J. Macken, “Remote Laser Welding,” Proceeding of the International Body Engineering Conference, Advanced Technologies and Processes, Warren-MI, 1996, pp. 11-15.
J. Cann, “A Look at the Remote Laser Beam Welding,” Welding Journal, Vol. 84, No. 8, 2005, pp. 34-37.
M. Grupp, T. Seefeld and F. Vollertsen, “Laser Beam Welding with Scanner,” Proceedings of the Second In ternational WLT-Conference on Lasers in Manufacturing, Munich, 2003, pp. 211-222.
G. Tsoukantas and G. Chryssolouris, “Theoretical and Experimental Analysis of the Remote Welding Process on Thin, Lap-Joined AISI 304 Sheets,” International Journal of Advanced Manufacturing Technology, Vol. 35, No. 9 10, 2008, pp. 880-894. doi:10.1007/s00170-006-0767-0
F. Oefele, J. Musiol and M. F. Zaeh, “Influence of Re mote-Laser-Welding Parameters for an 8 kW Fibre Laser on Seam Quality of Steels,” The 27th International Con gress on Applications of Lasers & Electro-Optic (ICALEO 2008), Temecula, 2008, pp. 399-405.
C. Kim, J. Kim, H. Lim and J. Kim, “Investigation of Laser Remote Welding Using Disc Laser,” Journal of Ma terials Processing Technology, Vo. 201, No. 1-3, 2008, pp. 521-525. doi:10.1016/j.jmatprotec. 2007.11.165
S. Kenji, Y. Motomichi, M. Kenta, Y. Daisuke, K. Yusuke and O. Takuya, “Development of Remote Laser Welding Method Using Long Focal-Distance Lens for Automobile Galvannealed Steel,” Transactions of the Japan Welding Society, Vol. 27, No. 2, 2009, pp. 60-63. doi:10.2207/qjjws.27.60s
K. Klingbeil, “What You Need to Know about Remote Laser Welding: A Look at How Remote Laser Welding Works and How It Can Be Applied to Your Manufactur ing Process,” Welding Journal, Vol. 85, No. 8, 2006, pp. 44-46.
M. P. Vanska, “Implementing the Modern Fiber Laser Technology for Welding of Stainless Tubular Products,” Master’s Thesis, Lappeenranta University of Technology, Lappeenranta, 2009.
M. F. Zaeh, J. Moesl, J. Musiol and F. Oefele, “Material Processing with Remote Technology—Revolution or Evo lution?” Physics Procedia, Vol. 5, 2010, pp. 19-33. doi:10.1016/j.phpro.2010.08.119
T. Heston, “Remote Laser Beam Welding Shows Poten tial in the Body Shop,” Welding Journal, Vol. 79, No. 6, 2000, pp. 39-42.
M. Bemenek, “Technology Report: Welding from a Dis tance,” Industrial Laser Solutions, Vol. 21, No. 3, 2006, pp. 19-23.
E. Beyer, A. Klotzbach, V. Fleischer and L. Morgenthal, “Nd: YAG-Remote Welding with Robots,” Proceedings of the Second International WLT-Conference on Lasers in Manufacturing, Munich, 2003, pp. 367-373.
M. F. Zaeh, U. Munzert and F. Oefele, “Robot Based Remote-Laser-Welding without Scanner Optics,” Pro ceedings of the Fourth International WLT-Conference on Lasers in Manufacturing, Munich, 2007, pp. 1-8.
D. A. Sabo, “The Evolution of Scanners for Remote Welding Applications: The Rise of Beam Quality Leads to Proliferation of Remote Welding Applications,” 2007. http://www.thefabricator.com/article/ lasercutting/the-evolution-of-scanners-for-remote-welding-applications
M. Bea, R. Brockmann and D. Havrilla, “Remote Laser Welding in Automotive Production,” Industrial Laser Solutions, Vol. 26, No. 5, 2011, pp. 8-12.
M. F. Zaeh, J. Musiol and J. Moesl, “Methodical Qualification of Scanner Systems for Remote Laser Cutting,” Proceedings of the 29th International Congress on Ap plications of Laser & Electro-Optics, Orlando, 26-30 Sep tember 2010, pp. 362-370.
L. Quintino, A. Costa, R. Miranda, D. Yapp, V. Kumar and C. J. Kong, “Welding with High Power Fiber Laser— A Preliminary Study,” Materials and Design, Vol. 28, No. 4, 2007, pp. 1231-1237. doi:10.1016/j.matdes.2006.01.009
Y. Kawahito, M. Mizutani and S. Katayama, “Investiga tion of High-Power Fiber Laser Welding Phenomena of Stainless Steel,” Transactions of JWRI, Vol. 36, No. 2, 2007, pp. 11-15.
A. Kratky, D. Schuocker and G. Liedl, “Processing with kW Fiber Lasers—Advantages and Limits,” XVII Inter national Symposium on Gas Flow, Chemical Lasers and High-Power Lasers, 21 April 2009. doi:10.1117/12.816655
M. Lütke, A. Mahrle, T. Himmer, L. Morgenthal and E. Beyer, “Remote Cutting—A Smart Solution Using the Advantages of High Brightness Lasers,” Proceedings of the International Congress on Applications of Lasers & Electro-Optics, Temecula, 20-23 October 2008, pp. 695 702.
Duggan Manufacturing, “New Process Development Fa cility for Remote Fiber Laser Welding,” 2010. http://weldingdesign.com/equipment-automation/news/process-development-facility-remote-fiber-laser-0313/
P. Anthony, “The Reality of Remote Laser Welding,” In dustrial Laser Solutions, Vol. 19, No. 2, 2004, pp. 9-11.
A. Korinth and J. Cann, “Remote Welding Impacts on Auto Manufacture,” Industrial Laser Solutions, Vol. 20, No. 5, 2005, pp. 26-31.
J. Hatwig, G. Reinhart and M. F. Zaeh, “Automated Task Planning for Industrial Robots and Laser Scanners for Remote Laser Beam Welding and Cutting,” Production Engineering: Research and Development, Vol. 4, No. 4, 2010, pp. 327-332. doi:10.1007/s11740-010-0252-3
K. Mori, T. Tarui, T. Hasegawa and N. Yoshikawa, “Re mote Laser Welding Applications for Car Bodies,” Weld ing International, Vol. 24, No. 10, 2010, pp. 758-763. doi:10.1080/09507111003655283
L. X. Zhang, L. Wu, H. M. Gao and G. J. Zhang, “Agent Based Modeling and Control of Remote Robotic Welding System,” Robotic Welding, Intelligence and Automation, Vol. 362, 2007, pp. 187-194. doi:10.1007/978-3-540-73374-4_21
K. Krastel, “Remote Laser Welding in Industrial Appli cations,” 2006. http://www.photonics.com/ Article.aspx?AID=26648
G. Verhaeghe, “Remote Laser Welding for Automotive Seat Production,” Industrial Laser Solutions, Vol. 27, No. 3, 2012, pp. 6-11.
J. Duong, “Qualification of the Convection Mode Laser Beam Welding Process,” Master’s Thesis, Lappeenranta University of Technology, Lappeenranta, 2010.
W. M. Steen and J. Mazumder, “Laser Material Processing,” 4th Edition, Springer, London, 2010. doi:10.1007/978-1-84996-062-5
R. L. O’Brien, “Laser Beam Welding,” In: R. L. O’Brien, Ed., Welding Handbook—Welding Processes, 8th Edition, Vol. 2, American Welding Society, Miami, 1991, pp. 713-738.
S. Katayama, S. Oiwa, N. Matsumoto, M. Mizutani and Y. Kawahito, “Fundamentals of Fiber Laser Remote Wel ding and Deep Penetration Welding,” European Quantum Electronics Conference on Lasers and Electro-Optics, Mu nich, 14 19 June 2009, p. 1.
L. Hartwig, R. Ebert, S. Kloetzer, S. Weinhold, J. Dre chsel, F. Peuckert, J. Schille and H. Exner, “Material Processing with a 3 kW Single Mode Fiber Laser,” Jour nal of Laser Micro/Nanoengineering, Vol. 5, No. 2, 2010, pp. 128-133.
F. Oefele, U. Munzert, M. F. Zaeh, “Remote-Laser-Wel ding with an 8 kW Fibre Laser,” Proceedings of the Laser Assisted Net Shape Engineering, Erlangen, 2007, pp. 183-196.
M. J. Song, B. H. Jung, M. Y. Lee and J. Suh, “Laser Welding Automobile Bumpers: Remote Welding System with Shielding Gas,” Industrial Laser Solutions, Vol. 23, No. 4, 2008, pp. 17-20.
C. Dawes, “Laser Welding: A Practical Guide,” Abington Publishing, Cambridge, 1992. doi:10.1533/9781845698843
C. Wandera, “Laser Cutting of Austenitic Stainless Steel with a High Quality Laser Beam,” Master’s Thesis (In Finnish), Lappeenranta University of Technology, Lap peenranta, 2006.