Verification of Damage Detection Algorithm by Prototype Building Structure Test
- 1 Structural Engineering Research Division, Korea Institute of Construction Technology, Goyang, South Korea
- 2 Structural Engineering Research Division, Korea Institute of Construction Technology, Goyang, South Korea
Abstract
Safety related accidents of buildings and civil engineering structures have been reported all over the world. With the increasing importance of securing the safety of social infrastructure and optimum performance levels to prevent these accidents, a lot of attention has been concentrated on monitoring performance degradation due to structural defects and deterioration. In this study, the algorithm was developed to evaluate the safety of structures by analyzing signals of time domain and frequency domain, and the developed algorithm was verified through a forced vibration test. From the results of time-domain and frequency-domain data analysis, the damage detection results by each sensor location with a high degree of accuracy were derived in both methods.
- S.-H. Lee, S.-S. Woo, L. Chung and D.-G. Lee, “Field Measurements for Identification of the Vibration Accident Cause of a 39-Story Steel Building Structure,” Architectural Institute of Korea, 2013, pp. 19-27.
- K.-T. Park, Y.-J. Yu, B.-M. Lee, J.-H. Lee, “State-of-theArt of IT Based High Precision Patch/Implant System Technology Development for Building/Large Structure Safety Management of in Korea,” Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, Vol. 8345, 2012, Article ID: 83453G.
- J.-R. Shin, T.-K. An, C. Lee, S.-H. Park, “Numerical Studies on the Structural-Health Evaluation of Subway Stations Based on Statistical Pattern Recognition Techniques,” The Korean Society for Railway, 2011, pp. 17351741.
- Z.-D. Xu and Z. S. Wu, “Energy Damage Detection Strategy Based on Acceleration Responses for Long-Span Bridge Structures,” Engineering Structures, Vol. 29, No. 4, 2007, pp. 609-617. http://dx.doi.org/10.1016/j.engstruct.2006.06.004
- S. Coles, “An Introduction to Statistical Modeling of Extreme Values,” Springer, Verlag, 2001, pp. 47-49.