The Finite-Element Modeling of Dynamic Motions of a Constraint Wind Turbine and the System Diagnosis for the Safety Control
- 1 Department of Technology Education, Mechatronics, Sehan University, Jeonnam, Korea
Abstract
The aim of this paper is to present a finite element modeling of the dynamic motion of a turbine rotor and its controller design with the mass unbalance under a crack on a rotating shaft. This process is an advanced method to the mathematical description of a system including an influence of a mass unbalance and a crack on the rotor shaft. As the first step, the shaft is physically modeled with a finite element method and the dynamic mathematical model is derived by using the Hamilton principle; thus, the system is represented by various subsystems. The equation of motion of a shaft with a mass unbalance and a crack is established by adapting the local mass unbalance and stiffness change through breathing and gaping from the existence of a crack. This is a reference system for the given system. Based on a fictitious model for transient behavior induced from vibration phenomena measured at the bearings, an elementary estimator is designed for the safety control and detection of a mass unbalance on the shaft. Using the state estimator, a bank of an estimator is established to get the diagnosis and the system data for a controller.
- R. V. Beard, “Failure Accommodation in Linear System through Self Recognition,” Report MVT-71-1, Man Vehicle Laboratory, MIT, Cambridge, 2005.
- R. J. Patton and S. M. Kangetehe, “Robust Fault Diagnosis Using Eigen Structure Assignment of Observers,” In: R. Patton, P. Frank and R. Clark, Eds., Fault Diagnosis in Dynamic Systems, Prentice Hall, Herausgeber, 1984.
- R. Iserman, “Identification Dynamischersysteme, Band I and II,” Spring Verlag, Berlin, 1984.
- P. C. Mueller, “Estimation and Compensation of Nonlinearities,” Proceedings of 1st Asian Conference, Tokyo, 27-30 July 1994, pp. 228-234.
- R. W. Park, “Estimation of a Mass Unbalance under the Crack on the Rotating Shaft,” ICASE, Vol. 2, No. 4, 2000, pp. 228-234.
- R. W. Park, “Crack Detection, Localization and Estimation of a Depth in a Turbo Rotor,” KSME International Journal, Vol. 14, No. 7, 2000, pp. 732-729.
- R. W. Park and P. C. Mueller, “A Contribution to Crack Detection, Localization and Estimation of a Depth in a Turbo Rotor,” ASCC Proceedings, Vol. II, 1997, pp. 427430.
- R. W. Park and S. Cho, “Noise and Fault Diagnosis Using Control Theory,” Proceeding of 13th Korea Automation Control Conference, ICASE, International Session Paper, Seoul, 6-11 July 1998.