Research ArticleOpen AccessGoogle Scholar indexed
Injection Scheme Optimization of Foam Profile Control on Block S103
Accumulation and Development of Unconventional Oil and Gas, State Key Laboratory Cultivation Base Jointly-Constructed by Heilongjiang Province and the Ministry of Science and Technology, Northeast Petroleum University, Daqing, China;Key Laboratory of Ministry of Education PRC, Northeast Petroleum University, Daqing, China
Accumulation and Development of Unconventional Oil and Gas, State Key Laboratory Cultivation Base Jointly-Constructed by Heilongjiang Province and the Ministry of Science and Technology, Northeast Petroleum University, Daqing, China;Key Laboratory of Ministry of Education PRC, Northeast Petroleum University, Daqing, China
Accumulation and Development of Unconventional Oil and Gas, State Key Laboratory Cultivation Base Jointly-Constructed by Heilongjiang Province and the Ministry of Science and Technology, Northeast Petroleum University, Daqing, China;Key Laboratory of Ministry of Education PRC, Northeast Petroleum University, Daqing, China
- 1 Accumulation and Development of Unconventional Oil and Gas, State Key Laboratory Cultivation Base Jointly-Constructed by Heilongjiang Province and the Ministry of Science and Technology, Northeast Petroleum University, Daqing, China;Key Laboratory of Ministry of Education PRC, Northeast Petroleum University, Daqing, China
- 2 Accumulation and Development of Unconventional Oil and Gas, State Key Laboratory Cultivation Base Jointly-Constructed by Heilongjiang Province and the Ministry of Science and Technology, Northeast Petroleum University, Daqing, China;Key Laboratory of Ministry of Education PRC, Northeast Petroleum University, Daqing, China
- 3 Accumulation and Development of Unconventional Oil and Gas, State Key Laboratory Cultivation Base Jointly-Constructed by Heilongjiang Province and the Ministry of Science and Technology, Northeast Petroleum University, Daqing, China;Key Laboratory of Ministry of Education PRC, Northeast Petroleum University, Daqing, China
Copy link · social · email
Abstract
Facing problems with oil production decreasing quickly and water content increasing gradually in S103 well area, the Foam Profile Control was studied on the basis of its confirmed agent formula. The facies-controlled geological model of S103 well area was generated using random model based on Petrel software and using numerical simulation based on CMG software. Gas liquid alternating injection pattern was optimized as the optimal solution through the simulation optimization. Two months are optimized as the optimal solution through the simulation optimization. The cumulative oil production is 0.933 × 10 7 kg which is higher than the value of subsequent water flooding and the other three. Finally, it reaches the goals of slowing down the production decline and controlling the water rising.
KeywordsFoam Profile ControlNumerical SimulationInjection PatternInjection Cycle
- Z. L. Khatib, G. J. Hirasaki and A. H. Falls, “Effects of Capillary Pressure on Coalescence and Phase Mobilities in Foams Flowing Through Porous Media,” SPE Reservoir Engineering, Vol. 3, No. 3, 1988, pp. 919-926. http://dx.doi.org/10.2118/15442-PA
- A. W. Fisher, R. W. S. Fouiser and S. G. Goodyear, “Mathematical Modeling of Foam Flooding,” SPE/DOE Enhanced Oil Recovery Symposium, Tulsa, 22-25 April 1990, pp. 231-240. http://dx.doi.org/10.2118/20195-MS
- E. M. Ozbayoglu, S. Akin and T. Eren, “Foam Characterization Using Image processing Techniques,” SPE Western Regional Meeting, Irvine, 30 March-1 April 2005, pp. 1-8.
- Z. Q. Li, G. H. Zhou and Z. M. Zhou, “The Feasibility Studies of Polymer Foam Flooding in Gudao Oilfield,” SPE Asia Pacific Oil & Gas Conference and Exhibition, Adelaide, 11-13 September 2006, pp. 1-8.
- Q. J. Du, J. Hou, Z. Q. Li, Y. D. Wang and Y. M. Chen, “A Mathematical Model of Polymer Enhanced Foam Flooding,” Chinese Journal of Computational Physics, Vol. 26, No. 6, 2009, pp. 872-878．
- H. Pei, G. Zhang, J. Ge, J. Wang, B. Ding and X. Liu, “Investigation of Polymer-Enhanced Foam Flooding with Low Gas/Liquid Ratio for Improving Heavy Oil Recovery,” Canadian Unconventional Resources and International Petroleum Conference, Calgary, 19-21 October 2010, pp. 1-11. http://dx.doi.org/10.2118/137171-MS
- Q. L. Gang, “High Water Cut Stage Oilfield New Technologies to Improve Water Flooding Effect (on),” 1st Edition, Petroleum Industry Press, Beijing, 1999.
- J. E. Smith, “Quantative Evaluation of Polyacrylamide Crosslinked Gels for Use in Enhanced Oil Recovery,” International ACS Symposium, Anahemi, September, 1986, pp. 9-12.
- X. F. Jia, G. L. Lei and X. Y. Jia, “Current Situation and Development Trend of In-Depth Profile Control,” Special Oil & Gas Reservoirs, Vol. 16, No. 4, 2009, pp. 6-12.