This work deals with a finite element procedure developed to perform the eigenvalue analysis of damped gyroscopic systems, represented by flexible rotors supported on fluid film journal bearings. The rotor finite element model is based on the Timoshenko beam theory, accounting for the shaft rotary inertia and gyroscopic moments. The governing equations for the hydrodynamic journal bearing are obtained through the Galerkin weighted residual method applied to the classical Reynolds equation. A perturbation scheme on the fluid film governing equation permits to obtain the zero-th and first order lubrication equations for the bearings, which allow the computation of the dynamic force coefficients associated with the bearing stiffness and damping. The rotor-bearing system equation, which consists of a case of damped gyroscopic equation, is rewritten on state form to compute the complex eigenvalues. The natural frequencies at several operating conditions are obtained and compared to the technical literature data. The influence of the effective damping on the eigenvalue real part sign is analyzed for some examples of rotor-bearing systems, showing how the stability conditions can be predicted by the eigenvalue analysis. The procedure implemented in this work can provide useful guidelines and technical data about the selection of the more appropriate set of bearing parameters for rotating machines operating at stringent conditions.
KeywordsFlexible RotorsFluid Film BearingsRotor-Bearing SystemsFinite ElementEigenvalue Problem
Childs, D.W. (1993) Turbomachinery Rotordynamics. Wiley, New York, 476 p.
Vance, J. (1988) Rotordynamics of Turbomachinery. John Wiley, New York, 388 p.
Nelson, H.D. and McVaugh, J.M. (1976) The Dynamics of Rotor-Bearing Systems Using Finite Elements. ASME Journal of Engineering for Industry, 98, 593-600.
Zorzi, E.S. and Nelson, H.D. (1977) Finite Element Simulation of Rotor-Bearing Systems with Internal Damping. ASME Journal of Engineering for Power, 99, 71-76.
Nelson, H.D. (1980) A Finite Rotating Shaft Element Using Timoshenko Beam Theory. ASME Journal of Mechanical Design, 102, 793-803. http://dx.doi.org/10.1115/1.3254824
Miranda, W.M., Machado, L.H.J. and Faria, M.T.C. (2005) Some Insights into the Dynamic Response of Flexible Rotors Supported on Fluid Film Bearings. 18th International Congress of Mechanical Engineering, COBEM 2005, Ouro Preto, 8 p.
Correia, F.A.G. (2007) Determinação de Características de Desempenho de Mancais Radiais Elípticos Utilizando o Método de Elementos Finitos. Masters’ Dissertation, Universidade Federal de Minas Gerais, Brasil.
Busse, L., Heiberger, D. and Wey, J. (1980) Aspects of Shaft Dynamics for Industrial Turbines. Brown Boveri Review, 67, 292-299.
Sternlicht, B. and Lewis, P. (1968) Vibration Problems with High-Speed Turbomachinery. ASME Journal of Engineering for Industry, 90, 174-186.
Lund, J.W. (1994) Application of Modal Methods in Rotor Dynamics. 4th IFTOMM Conference—Rotordynamics, Chicago, 317-320.
Boedo, S. and Booker, J.F. (1997) Surface Roughness and Structural Inertia in a Mode-Based Mass-Conserving Elastohydrodynamic Lubrication Model. ASME Journal of Tribology, 119, 449-455. http://dx.doi.org/10.1115/1.2833518
Zhao, S., Xu, H., Meng, G. and Zhu, J. (2005) Stability and Response Analysis of Symmetrical Single-Disk Flexible Rotor-Bearing System. Tribology International, 38, 749-756. http://dx.doi.org/10.1016/j.triboint.2004.11.004
Xie, W.H., Tang, Y.G. and Chen Y.S. (2008) Analysis of Motion Stability of the Flexible Rotor-Bearing System with Two Unbalanced Disks. Journal of Sound and Vibration, 310, 381-393.
Gupta, K.K. (1974) Eigenproblem Solution of Damped Structural Systems. International Journal for Numerical Methods in Engineering, 8, 877-911. http://dx.doi.org/10.1002/nme.1620080414
Meirovitch, L. and Ryland, G. (1979) Response of Slightly Damped Gyroscopic Systems. Journal of Sound and Vibration, 67, 1-19. http://dx.doi.org/10.1016/0022-460X(79)90497-8
Palazzolo, A.B., Wang, B.P. and Pilkey, W.D. (1983) Eigensolution Reanalysis of Rotor Dynamic Systems by the Generalized Receptance Method. ASME Journal of Engineering for Power, 105, 543-550. http://dx.doi.org/10.1115/1.3227450
Ehrich, F.F. (1992) Handbook of Rotordynamics. McGraw-Hill, New York, 452 p.
Li, L., Hu, Y. and Wang, X. (2012) A Parallel Way for Computing Eigenvector Sensitivity of Asymmetric Damped Systems with Distinct and Repeated Eigenvalues. Mechanical Systems and Signal Processing, 30, 61-77. http://dx.doi.org/10.1016/j.ymssp.2012.01.008
Plaut, R.H. and Huseyin, K. (1973) Derivatives of Eigenvalues and Eigenvectors in Non-Self-Adjoint Systems. AIAA Journal, 11, 250-253. http://dx.doi.org/10.2514/3.6740
Lund, J.W. (1980) Sensitivity of the Critical Speeds of a Rotor to Changes in the Design. ASME Journal of Mechanical Design, 102, 115-121. http://dx.doi.org/10.1115/1.3254701
Rajan, N., Nelson, H.D. and Chen, W.J. (1986) Parameter Sensitivity in the Dynamics of Rotor-Bearing Systems. ASME Journal of Vibration, Acoustics, Stress, and Reliability in Design, 108, 197-206.
Done, G.T.S. and Hughes, A.D. (1975) The Response of a Vibrating Structure as a Function of Structural Parameters. Journal of Sound and Vibration, 38, 255-266. http://dx.doi.org/10.1016/S0022-460X(75)80009-5
Rao, B.S., Sekhar, A.S. and Majumdar, B.C. (1996) Analysis of Rotors Considering Distributed Bearing Stiffness and Damping. Compurers & Structures, 61, 951-955. http://dx.doi.org/10.1016/0045-7949(96)00027-2
Werner, U. (2013) Mathematical Rotordynamic Model Regarding Excitation Due to Elliptical Shaft Journals in Electrical Motors Considering the Gyroscopic Effect. Applied Mathematics, 4, 57-74. http://dx.doi.org/10.4236/am.2013.48A009
Jeon, S.M., Kwak, H.D., Yoon, S.H. and Kim, J. (2013) Rotordynamic Analysis of a High Thrust Liquid Rocket Engine Fuel (Kerosene) Turbopump. Aerospace Science and Technology, 26, 169-175. http://dx.doi.org/10.1016/j.ast.2012.03.005
Meirovitch, L. (1974) A New Method of Solution of the Eigenvalue Problem for Gyroscopic Systems. AIAA Journal, 12, 1337-1342. http://dx.doi.org/10.1016/j.ast.2012.03.005
Meirovitch, L. (1980) Computational Methods in Structural Dynamics. Sijthoff & Noofdhoff International Publishers, The Netherlands.
Childs, D.W. and Graviss, K. (1982) A Note on Critical Speed Solutions for Finite-Element-Based Rotor Models. ASME Journal of Mechanical Design, 104, 412-416. http://dx.doi.org/10.1115/1.3256359
Faria, M.T.C. (2001) Some Performance Characteristics of High Speed Gas Lubricated Herringbone Groove Journal Bearings. JSME International Journal, Series C, 44, 775-781. http://dx.doi.org/10.1299/jsmec.44.775
Faria, M.T.C., Correia, F.A.G. and Teixeira, N.S. (2007) Oil Lubricated Cylindrical Journal Bearing Analysis Using the Finite Element Method. Proceeding of the 19th International Congress of Mechanical Engineering (COBEM 2007), Brasilia, 10 p.
James, M.L., Smith, G.M., Wolford, J.C. and Whaley, P.W. (1994) Vibration of Mechanical and Structural Systems. Harper Collins, 2nd Edition, USA, 660 p.
Lund, J.W. (1974) Stability and Damped Critical Speeds of a Flexible Rotor in Fluid Film Bearings. ASME Journal of Engineering for Industry, 96, 509-517.