Research ArticleOpen AccessGoogle Scholar indexed
An Identified Study on the Active Network of a Thermoacoustic Regenerator
- 1
- 2
- 3
- 4
- 5
Copy link · social · email
Abstract
An active thermo-acoustic network model of regenerator which is a key component to accomplish the con-version between thermal-and acoustic power in thermo-acoustic system has been established in this paper. The experiment was carried out to quantify the network. A method called least square is employed in order to identify the H matrix describing the system. The results obtained here show that the active thermo-acoustic network can reliably depict the characteristics of a thermo-acoustic system.
KeywordsRegeneratorActive NetworkH MatrixSystem Identification
- J. Gary, D. E. Pancy, and R. Radebaugh, “A computational model for a regenerator,” in: Proceedings of Third Cryocooler Conference, NIST Special Publication, Vol. 698, pp.199-211, 1985.
- Y. Matsubara, “Effect of void volume in regenerator,” in: Proceedings of The Sixth International Cryocooler Conference, 1990.
- K. Nam and S. Jeong, “Novel flow analysis of regenerator under oscillating flow with pulsating pressure,” Cryogenics, Vol. 45, pp. 368-379, 2005.
- Y. Y. Chen, E. C. Luo, and W. Dai, “Heat transfer characteristics of oscillating flow regenerator filled with circular tubes or parallel plates,” Cryogenics, Vol. 47, pp. 40-48, 2007.
- G. W. Swift, “Thermoacoustic engines,” Journal of the Acoustical Society of America, Vol. 84, No. 4, pp. 1145-1179, 1988.
- X. H. Deng, “Thermoacoustic theory of regenerator and design theory for thermoacoustic engine [D],” Wuhan: Huazhong University of Science and Technology, 1994.
- F. Wu, et al., “Active network modeling for regenerator cryocooler [A],” Proceedings of Symposium on Energy Engineering in the 21st Century [C], Begell House New York, Wallingford, 2000.
- F. Z. Guo, “Dynamic heat transfer [M],” Wuhan: Huazhong University of Science and Technology Press, 1997.
- Q. Tu, Q. Li, F. Wu, and F. Z. Guo, “Network model approach for calculating oscillating frequency of thermoacoustic prime mover,” Cryogenic, Vol. 43, pp. 351- 357, 2003.
- Q. Tu, C. Wu, Q. Li, F. Wu, and F. Z. Guo, “Influence of temperature gradient on acoustic characteristic parameters of stack in TAE,” International Journal of Engineering Science, Vol. 41, pp. 1337-1349, 2003.