The fiber reinforced plastics (FRPs) are being used widely in the most diverse applications ranging from the aerospace to the sports goods industry. Drilling in particular is important to facilitate the assembly operations of structurally intricate composite products. The drilling of holes in FRPs leads to drilling induced damage which is an important research area. The researchers worldwide have tried to minimize the damage by optimizing the operating variables, and tool designs as well as by developing unconventional methods of hole making. Most of the work done so far has been experimental in nature with little or no focus on numerical simulation of the drilling behavior of FRPs. In the present research endeavor, a finite element model has been developed to investigate the drilling induced damage of FRP laminates.
KeywordsDrillingDelaminationFinite Element Analysis
C. C. Tsao, “Thrust Force and Delamination of Core Saw Drill During Drilling of Carbon Fiber Reinforced Plastics (CFRP),” International Journal of Advanced Manufacturing Technology, Vol. 37, 2008, pp. 23-28.doi:10.1007/s00170-007-0963-6
A..Krishnamoorthy, S. R. Boopathy and K. Palanikumar, “Delamination Analysis in Drilling of CFRP Composites Using Response Surface Methodology,” Journal of Composite Materials, Vol. 43, No. 24, 2009, pp. 2885-2901. doi:10.1177/0021998309345309
W. Chen, “Some Experimental Investigations in the Drilling of Carbon Fiber Reinforced Plastic (CFRP) Composite Laminates,” International Journal of Machine Tools and Manufacture, Vol. 37, No. 8, 1997, pp. 1097-1108. doi:10.1016/S0890-6955(96)00095-8
N. S. Mohan, S. M. Kulkarni and A. Ramachandra, “Delamination Analysis in Drilling Process of Glass Fiber Reinforced Plastic (GFRP) Composite Materials,” Journal of Materials Processing Technology, Vol. 186, No. 1-3, 2007, pp. 265-271.doi:10.1016/j.jmatprotec.2006.12.043
N. Bhatnagar, I. Singh and D. Nayak, “Damage Investigation in Drilling of Glass Fiber Reinforced Plastic Composite Laminates,” Materials and Manufacturing Processes, Vol. 19, No. 6, 2004, pp. 995-1107. doi:10.1081/AMP-200034486
I. Singh and N. Bhatnagar, “Drilling of Uni-Directional Glass Fiber Reinforced Plastic (UD-GFRP) Composite Laminates,” International Journal of Advanced Manufacturing Technology, Vol. 27, No. 9-10, 2006, pp. 870-876. doi:10.1007/s00170-004-2280-7
J. Mathew, N. Ramakrishnan and N. K. Naik, “Trepanning on Unidirectional Composites,” Composites Part A, Vol. 30, No. 8, 1999, pp. 951-959. doi:10.1016/S1359-835X(99)00012-3
S. C. Lin and J. M. Shen, “Drilling Unidirectional Glass Fiber Reinforced Composite Materials at High Speed,” Journal of Composite Materials, Vol. 33, No. 9, 1999, pp. 827-851.doi:10.1177/002199839903300903
R. Piquet, B. Ferret, F. Lachaud and P. Swider, “Experimental Analysis of Drilling Damage in Thin Carbon/Epoxy Plate Using Special Drill,” Composites Part A, Vol. 31, No. 10, 2000, pp. 1107-1115. doi:10.1016/S1359-835X(00)00069-5
A. M. Abrao, P. E. Faria, J. C. C. Rubio, P. Reis, J. P. Davim, “Drilling of Fiber Reinforced Plastics: A Review,” Journal of Materials Processing Technology, Vol. 186, No. 1-3, 2007, pp. 1-7. doi:10.1016/j.jmatprotec.2006.11.146
E. Kilickap, “Optimization of Cutting Parameters on Delamination Based on Taguchi Method during Drilling of GFRP Composite,” Expert Systems with Applications, Vol. 37, No. 8, 2010, pp. 6116-6122. doi:10.1016/j.eswa.2010.02.023
L. M. P. Dur?o, D. J. S. Gon?alves, J. M. R. S. Tavares, V. H. C. Albuquerque, A. A. Vieira, A. T. Marques, “Drilling Tool Geometry Evaluation for Reinforced Composite Laminates,” Composite Structures, Vol. 92, No. 7, 2010, pp. 1545-1550. doi:10.1016/j.compstruct.2009.10.035
A. Velayudham and R. Krishnamurthy, “Effect of Point Geometry and Their In?uence on Thrust and Delamination in Drilling of Polymeric Composites,” Journal of Materials Processing Technology, Vol. 185, No. 1-3, 2007, pp. 204-209. doi:10.1016/j.jmatprotec.2006.03.146
C. C. Tsao, “Investigation into the Effects of Drilling Parameters on Delamination by Various Step-Core Drills,” International Journal of Materials and Product Technology, Vol. 206, No. 1-3, 2008, pp. 405-411. doi:10.1016/j.jmatprotec.2007.12.057
A. Matzenmiller, J. Lubliner and R. L. Taylor, “A Constitutive Model for Anisotropic Damage in Fiber-Composites,” Mechanics of Materials, Vol. 20, 1995, pp. 125-152. doi:10.1016/0167-6636(94)00053-0
D. Arola and M. Ramulu, “Orthogonal Cutting of Fiber-Reinforced Composites: A Finite Element Analysis,” International Journal of Mechanical Sciences, Vol. 39, No. 5, 1997, pp. 597-613. doi:10.1016/S0020-7403(96)00061-6
D. A. Budan and S. Vijayarangan, “Quality Assessment and Delamination Force Evaluation in Drilling of Glass Fiber Reinforced Plastic Laminates—A Finite Element Analysis and Linear Elastic Fracture Mechanics Approach,” Proceedings of the Institution of Mechanical Engineers Part B—Journal of Engineering Manufacture, Vol. 216, 2002, pp. 173-182.
L. M. P. Durao, M. F. S. F. de Moura and A. T. Marques, “Numerical Simulation of the Drilling Process on Carbon/Epoxy Composite Laminates,” Composites Part A, Vol. 37, No. 9, 2006, pp. 1325-1333. doi:10.1016/j.compositesa.2005.08.013
Z. Redouane and C. Francis, “Numerical Prediction of the Thrust Force Responsible of Delaminate During the Drilling of the Long-Fiber Composite Structures,” Composites: Part A, Vol. 38, 2007, pp. 858-866.
R. Rahme, Y. Landon, F. Lachaud, R. Piquet and P. Lagarrigue, “Analytical Model for Composite Laminates Drilling,” International Journal of Advanced Manufacturing Technology, Vol. 52, No. 5-8, 2010, pp. 609-917. doi:10.1007/s00170-010-2773-5
D. Bhattacharya and D. P. W. Horrigan, “A Study of Hole Drilling in Kevlar Composites,” Composites Science and Technology, Vol. 58, No. 2, 1998, pp. 267-283. doi:10.1016/S0266-3538(97)00127-9
L. M. P. Durao, M. F. S. F. De-Moura and A. T. Marques, “Numerical Prediction of Delamination Onset in Carbon/Epoxy Composites Drilling,” Engineering Fracture Mechanics, Vol. 75, No. 9, 2008, pp. 2767-2778. doi:10.1016/j.engfracmech.2007.03.009
I. Singh, N. Bhatnagar and P. Viswanath, “Drilling of Uni-Directional Glass Fiber Reinforced Plastics: Experimental and Finite Element Study,” Materials & Design, Vol. 29, No. 2, 2008, pp. 546-553. doi:10.1016/j.matdes.2007.01.029
P. K. Rakesh, I. Singh and D. Kumar, “Failure Prediction in Glass Fiber Reinforced Plastic Laminates with Drilled Hole Under Uniaxial Loading,” Materials & Design, Vol. 31, No. 6, 2010, pp. 3002-3007. doi:10.1016/j.matdes.2010.01.022
Z. Hashin, “Failure Criteria for Unidirectional Fiber Composites,” Journal of Applied Mechanics, Vol. 47, No. 2, 1980, pp. 329-334. doi:10.1115/1.3153664
I. Singh and N. Bhatnagar, “Drilling Induced Damage in Uni-Directional Glass Fiber Reinforced Plastic (UD-GFRP) Composite Laminates,” International Journal of Advanced Manufacturing Technology, Vol. 27, No. 9-10, 2006, pp. 877-882. doi:10.1007/s00170-004-2282-5
J. C. Rubio, A. M. Abrao, P. E. Faria, A. E. Correia, J. P. Davim, “Effects of High Speed in the Drilling of Glass Fiber Reinforced Plastic: Evaluation of the Delamination Factor,” International Journal of Machine Tools and Manufacture, Vol. 48, No. 6, 2008, pp. 715-720. doi:10.1016/j.ijmachtools.2007.10.015