Electrochemical Deposition and Optimization of Thermoelectric Nanostructured Bismuth Telluride Thick Films
- 1
- 2
Abstract
Bismuth telluride thick films are suitable for thermoelectric (TE) devices covering large areas and operating at small-to-moderate temperature differences (20 - 200 K). High efficiency and high coefficient of performance (COP) are expected to be achieved by using thick films in some cooling applications. Bismuth telluride thick films fabrication have been achieved with Galvanostatic and Potentionstatic deposition. Stoichiometric bismuth telluride thick film was obtained by Galvanostatic deposition at current density of 3.1 mAcm<sup>-2</sup>. Bismuth telluride films with average growth rate of 10 µmh<sup>-1</sup> and different composition were obtained. Effects of current density and composition of electrolyte in Galvanostatic deposition were studied. The current density affected the film compactness, where films deposited at lower current density were more compact than those deposited at higher current density. The morphology of the films did not depend on the current density, but chemical composition was observed when different composition of electrolyte was used. Effects of distance between electrodes, composition of electrolyte solution, and stirring in Potentionstatic deposition were studied. The shorter the distance between electrodes, the higher the electric field, thus the higher current density was applied and the deposited film was less compact. The current density increased more rapidly with stirring during electrodeposition which leads to less compact film. Through this study, films electrode-posited from solution containing 0.013 M Bi(NO<sub>3</sub>)<sub>3</sub>.5 H<sub>2</sub>O, 0.01 M TeO<sub>2</sub> and 1 M HNO<sub>3</sub> at 3.1 mA cm<sup>-2</sup> for 6 hours without stirring and with interelectrode distance of 4.5 cm were free-standing with average film thickness of 60 µm and optimum film composition of Bi<sub>2</sub>Te<sub>3</sub>. The crystallite size of the later films was found to be around 4.3 nm using Scherrer’s equation from XRD patterns. Also, negative Seebeck coefficient for the same samples was revealed with an average value of -82 μV.K<sup>-1</sup>.
- Y. Q. Cao, T. J. Zhu and X. B. Zhao, “Thermoelectric Bi2Te3 Nanotubes Synthesized by Low-Temperature Aqueous Chemi-cal Method,” Journal of Alloys and Compounds, Vol. 449, No. 1-2, January 2008, pp. 109- 112. doi:10.1016/j.jallcom.2006.01.116
- M. S. Dresselhaus, G. Chen, M. Y. Tang, R. Yang, H. Lee, D. Wang, Z. Ren, J. P. Fleurial and P. Gogna, “New Directions for Low-Dimensional Thermoelectric Materials,” Advanced Materials, Vol. 19, No. 8, April 2007, pp. 1043-1053. doi:10.1002/adma.200600527
- T. Cailat, A. Borshevsky and J. P. Fleurial, “Use of Mechanical Alloying to Prepare and Investigate New Potential Thermoelectric Materials,” Proc. XI Int. Conf. TEs., (Ed, K. R. Rao) Arlington, 1993, p. 9.
- C. H. Kuo, C. H. Hwanga, M. S. Jeng, W. S. Su, Y. W. Chou and J. R. Ku, “Thermoelectric Transport Properties of Bismuth Telluride Bulk Materials Fabricated by Ball Milling and Spark Plasma Sintering,” Journal of Alloys and Com-pounds, Vol. 496, No. 1-2, April 2010, pp. 687-690. doi:10.1016/j.jallcom.2010.02.171
- J. Zhou, S. Li, H. M. A. Soliman, M. S. Toprak, M. Muhammed, D. Platzek and E. Muller, “Seebeck Coefficient of Nanostructured Phospho-rus-Alloyed Bismuth Telluride Thick,” Journal of Alloys and Compounds, Vol. 471, No. 1-2, March 2009, pp. 278-281. doi:10.1016/j.jallcom.2008.03.088
- S. Li, M. S. Toprak, H. M. A. Soliman and J. Zhou, “Fabrication of Nanostructured Thermoelectric Bismuth Telluride Thick Films by Electro-chemical Deposition,” Chemistry of Materials, Vol. 18, No. 16, July 2006, pp. 3627-3633. doi:10.1021/cm060171o
- S. Li, H. M. A. Soliman, J. Zhou and M. S. Toprak, “Effects of An-nealing and Doping on Nanostructured Bismuth Telluride Thick Films,” Chemistry of Materials, Vol. 20, No. 13, July 2008, pp. 4403-4410. doi:10.1021/cm800696h
- Y. Miyazaki and T. Kajitani, “Preparation of Bi2Te3 Films by Electrodeposition,” Journal of Crystal Growth, Vol. 229, No. 1-4, July 2001, pp. 542-546. doi:10.1016/S0022-0248(01)01225-8
- H. P. Klug and L. E. Alexander, “X-Ray Diffraction Procedures,” John Wiley & Sons Inc., New York, 1954.
- P. Reinshaus, H. Sü?mann, M. Bohm, A. Schuck and T. Dietrich, “Use of Mechanical Alloying to Prepare and Investigate New Potential Thermoe-lectric Materials,” Proceedings of the 2nd European Sympo-sium on Thermoelectrics: Materials, Processing Techniques, and Applications, Krakow, 15-17 September 2004, European Thermoelectric Society, p. 90.
- D. Platzek, A. Zuber, C. Stiewe, G. B?hr, P. Reinshaus and E. Müller, “Anisotropy of the Seebeck Coefficient Detected by the Seebeck Scanning Microprobe,” Proceedings of the 22nd International Confer-ence on Thermoelectrics, LaGrande-Motte, 17-21 August 2003, IEEE, New York, 2004, p. 528.