An Experimental Study on the Behavior of Shear Keys According to the Curing Time of UHPC
- 1 Structural Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology, Goyang-Si, Republic of Korea
- 2 Structural Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology, Goyang-Si, Republic of Korea
- 3 Structural Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology, Goyang-Si, Republic of Korea
- 4 Structural Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology, Goyang-Si, Republic of Korea
- 5 Structural Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology, Goyang-Si, Republic of Korea
Abstract
Precast segmental construction has been recently developed to reduce the construction cost and shorten the construction term as compared to the cast-in-place method in a will to establish the design and erection system of structures using Ultra High Performance Concrete (UHPC). However, this method requires the presence of segmental joints to transfer the loads between neighboring segments, which stresses the importance of securing structural safety and serviceability. Therefore, need is for research on the behavior of the segmental joint for the structures erected by the precast segmental construction method. To that goal, this paper presents an experimental study on the behavior of shear keys with respect to the curing time of UHPC in the segmental joint. Analysis is done on the load-displacement relation according to the curing time of the shear keys and on the failure modes of the shear keys according to the cracking pattern at failure.
- Sowlat, K. and Rabbat, B.G. (1987) Testing of Segmental Concrete Girders with External Tendons. PCI Journal, 87-106.
- Serrette, R.L., Rizkalla, S.H., Attiogbe, E.K. and Heuvel, J.S. (1989) Multiple Shear Key Connections for Precast Shear Wall Panels. PCI Journal, 104-120.
- Walter Podolny, J.R. (1982) Recommended Practice for Precast Post-Tensioned Segmental Construction. PCI Journal, 14-61.
- Korea Institute of Construction Technology (1992) A Study on Design for Precast Prestressed Concrete Bridges. Final Report, KICT.
- Arockiasamy, M., Badve, P., Rao, V. and Reddy, V. (1991) Fatigue Strength of Joints in a Precast Prestressed Concrete Double Tee Bridge. PCI Journal, 36, 84-97. http://dx.doi.org/10.15554/pcij.01011991.84.97
- Bishara, A.G. and Papakonstantinou, N.G. (1990) Analysis of Cast-in-Place Concrete Segmental Cantilever Bridges. Journal of Structural Engineering, 116, 1247-1268. http://dx.doi.org/10.1061/(ASCE)0733-9445(1990)116:5(1247)
- Koseki, K. and Breen, J.E. (1983) Exploratory Study of Shear Strength of Joints for Precast Segmental Bridges. Research Report, Center for Transportation Research, The University of Texas at Austin, 1-165.
- Lee, C.H., Chin, W.J., Choi, E.S. and Kim, Y.J. (2011) An Experimental Study on the Joints in Ultra High Performance Precast Concrete Segmental Bridges. Journal of the Korea Concrete Institute, 23, 235-244. http://dx.doi.org/10.4334/JKCI.2011.23.2.235
- Yang, I.H. and Kim, K.C. (2012) Strength of Joint in Floating Structures Constructed with Precast Concrete Modules. Journal of Navigation and Port Research, 36, 197-204. http://dx.doi.org/10.5394/KINPR.2012.36.3.197
- Koh, K.T., Park, J.J., Ryu, G.S. and Kang, S.T. (2007) Effect of the Compressive Strength of Ultra-High Strength Steel Fiber Reinforced Cementitious Composites on Curing Method. Journal of the Korea Society of Civil Engineers, 27, 427-432.