Power Quality Improvement of Large Power System Using a Conventional Method
- 1
- 2
- 3
- 4
Abstract
Operation of a large power system with maintaining proper power quality is always been a difficult task. It becomes more difficult to maintain the power quality when rapid expansion of previously designed power system occurred. To redesign of such a power system is not feasible and also cost effective. To improve the quality of power of such a large system, conventional methods of compensation can be used. In this paper a power system of 419 buses is analyzed. It is found that 76 buses have under voltage problem. Conventional shunt compensation method is used by connecting capacitor in parallel to the bus. After compensation the system is simulated again and found that the under voltage problem of this large power system is removed. Power factor of the system is also improved.
- B. M. Zhang and Q. F. Ding, “The Development of FACTS and Its Control,” Advances in Power System Control, Operation and Management, APSCOM-97. 4th International Conference, Vol. 1, Beijing, 11-14 November 1997, pp. 48-53.
- J. J. Paserba, “How FACTS Controllers Benefit AC Transmission Systems,” Power Engineering Society General Meeting, IEEE, Vol. 2, Warrendale, 10 June 2004, pp. 1257-1262.
- A. Edris, “FACTS Technology Development: An Update,” Power Engineering Review, IEEE, Vol. 20, No. 3, March 2000, pp. 599-627.
- L. Gyugyi, “Application Characteristics of Con-verter- Based FACTS Controllers,” IEEE Conference on Power System Technology, Vol. 1, Perth, 4-7 December 2000, pp. 391-396.
- H. Dag, B. Ozturk and A.Ozyurek, “Application of Series and Shunt Compensation to Turkish National Power Transmission System to Improve System Loadability,” ELECO’99 Intenational Conference on Electrical and Elec-tronic Engineering, Bursa, 1-5 December 1999, pp. 243-247.
- J. R. Daconti and D. C. Lawry, “Increasing Power Transfer Capability of Existing Transmission Lines,” Transmission and Distribution Conference and Exposition, IEEE PES, Vol. 3, Schenectady, 7-12 September 2003, pp. 1004-1009.
- R. Rajarman, F. Alvarado, A. Maniaci, R. Camfield and S. Jalali, “Determination of Location and Amount of Series Compensation to Increase Power Transfer Capability,” IEEE Transactions on PowerSystems, Vol. 3, No. 2, 1998, pp. 294-300. doi:10.1109/59.667338
- R. S. Naik, K. Vaisakh and K. Anand., “Determination of ATC with PTDF Using Linear Methods in Presence of TCSC,” The 2nd Interna-tional Conference on Computer and Automation Engineering, Vol. 5, Singapore, 26-28 February 2010, pp. 146-151.
- N. G. Hingorani and L. Gyugyi, “Understanding FACTS, Concepts and Technology of Flexible AC Transmission systems,” IEEE Press, New York, 2000.
- J. Grainger and W. Ste-venson, “Power System Analysis,” McGraw-Hill, New York, 1994.