Research ArticleOpen AccessGoogle Scholar indexed
Modifying the Traditional Analyzing Method of Cylindrical Workpieces’ Deep Drawing Process by Using a Novel Loop Material Theory Method
Office of Science and Technology, South China University of Technology, Guangzhou, China
Chenghai Seals Plant, Chenghai, China
- 1 Office of Science and Technology, South China University of Technology, Guangzhou, China
- 2 Chenghai Seals Plant, Chenghai, China
Copy link · social · email
Abstract
In this paper, the traditional empirical coefficient method and a novel loop material analytical method presented by the authors have been compared and discussed by analyzing several practical cylindrical workpieces’ deep drawing projects. Also, some conclusions about how to modify the traditional analyzing method of cylindrical workpieces’ deep drawing process could be concluded and the necessity of this modification could be proved.
KeywordsCylindrical WorkpiecesDeep Drawing ProcessLoop MaterialsLoop Material Plastic Yield GenesAnalytical Model
- Wang, X.P. (1997) Design Information of Stamping. In: ‘Information’ Is a Form of Shorthand in This Paper, China Machine Press, Beijing.
- Lin, Z.W. and Lin, D.H. (2009) Forming Technology Analysis for the Loop Materials of Cylindrical Wall Formed by Plastic Deformation—Introduction to an Invention Patent about Technology Analysis Method for Cylindrical Workpieces Forming. Forging & Stamping Technology, 34, 57-62.
- Lin, Z.W. Technology Analysis Method for Cylindrical Workpieces Forming. Chinese Patent: ZL00107158.0.
- Lin, Z.W., Ruan, F. and Zhang, S.J. (1999) The Formula Judging Method on Decision the First Deep-Drawing Limits of Cylindrical Part. Forging & Stamping Technology, No. 4, 16-18.
- Lin, Z.W., Zhang, S.J. and Ruan, F. (1998) An Analysis and Computation Method on Deep-Drawing Blank Correction of Cylindrical Part. Forging and Pressing Academic Annual Meeting Proceedings, Guangzhou, 48-50.
- Lin, Z.W. and Lin, D.H. (2002) The Formula Judging Method of the First Time Deep-Drawing Limits of Cylindrical Part without Blank Holder. Forging and Pressing Academic Annual Meeting Proceedings, Guangzhou, 44-47.
- Lin, Z.W. (2006) Discussion on Calculation Formula of Edge-Turning Force of Interior Holes. Forging and Pressing Academic Annual Meeting Proceedings, 144-147.
- Lin, Z.W. and Cai, R.B. (1997) Discussion on the Process of Barrel Parts with U-Shape Notch. Automobile Technology, No. 8, 39-42, 46.
- Lin, Z.W. and Lin, D.H. (2001) The Formula Judging Method of Edge-Turning Limit of Interior Holes. Mechanical & Electrical Engineering Technology, No. 1, 30-32.
- Zheng, L.J. and Xu, H.J. (2014) Reverse Deduction of Cylinder Expansion Formula. Mechanical & Electrical Engineering Technology, 43, 185-187.