Research ArticleOpen AccessGoogle Scholar indexed
Designing a New Design of a Loading Cylinder for Pneumomechanical Spinning Machines
Tashkent Institute Textile and Light Industry, Tashkent, Uzbekistan
Tashkent Institute Textile and Light Industry, Tashkent, Uzbekistan
Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
- 1 Tashkent Institute Textile and Light Industry, Tashkent, Uzbekistan
- 2 Tashkent Institute Textile and Light Industry, Tashkent, Uzbekistan
- 3 Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Copy link · social · email
Abstract
The article explores the issue of designing a new design of a loading cylinder with a casing filled with vulcanized rubber for pneumomechanical spinning machines. The theoretical calculation of the deformed state of a cylindrical shell filled with vulcanized rubber is given. Deflections and stresses in the rubber layer are determined, which we use approximately for the Ritz methods. The theory of the radial and axial moving rubber layer was analyzed. The specific energy of deformation of a cylindrical layer of a compound cylinder is determined. The statics of the case and the loading cylinder of spinning machines are thoroughly studied.
KeywordsRubberMovingEuler EqualizationRitz MethodRadial DirectionsCylinderYoung’s Module
- Ponomarev, S.D., Biderman, V.L, Likharev, K.K., et al. (2014) Calculations on durability in Mechanical Engineering. State Scientific and Technical Publishing Houses of Machine-Building Literature, Moscow.
- Muradov, R. (2015) Bases of Increase of Efficiency of the Device for Pneumatic Transportation of Cotton. Monograph, Namangan.
- Skalak, R. (1957) Longitudinal Impact of a Semi-Infinite Circular Elastic Bar. Journal of Applied Mechanics, 79, 59-64.
- Sneddon, I.N. and Tait, R.J. (1963) The Effect of Penny-Shaped Crack on the Distribution of Stress in a Long Circular Cylinder. International Journal of Engineering Science, 1, 391-409. https://doi.org/10.1016/0020-7225(63)90016-8
- Flugge, V. (2014) Statics and Dynamics of Shells. Springer, Berlin.
- Hobson, G. and Born, J.S. (2014) Tables of Self-Equilibrating Function. J. Math. and phys., Liberek, Chehiya.
- Horvay, G. (1953) The End Problem of Rectanqular Strip. Journal of Applied Mechanics, 20, 87-94.
- Zhumaniyazov, K.Zh., Juraev, A.J., Gafurov, K.G., Matismailov, S.L., Mirzaev, O.A. and Anatoliy, D. (2014) Patent of UZ on Utility Model. FA 00688. “Feeding Cylinder of Spinning Devices” Based on MKK-1.