ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu…
Joongu Kang, Changsung Kim, Sanghwa Jung, Hongkoo Yeo
This study sought to review whether large-scale experimentation can apply to actual rivers concerning the effect of topographical change by scour in the downstream area of natural-type low drop structures on the fish habitat. The large-scale applicability exp…
Alfonso Calabria, Roberto Capata
Nowadays the utilization of vegetable oils, particularly the palm oil, as fuel in the power plant, has made a significant development in the last few years. This vegetable oil can be used in particular in slow marine-derived diesel internal combustion engine…
Omar Badran, Mohamed S. Gaith, Ali Al-Solihat
In this study, the vibration of a cylindrical tank partially filled with liquid under motion modeled as mass lumped is investigated. A three-dimensional quasi-static model of a partially-filled tank of circular cross-section is developed and integrated into a…
Petra Kersting, Dirk Biermann, Eugen Krebs
The precise micromanufacturing of complex dies with small structures for sheet-bulk metal forming is a challenge due to the high hardness of the materials to be machined. Experiments have shown that micromilling of these difficult-to-machine materials is poss…
R. Pérez-Garibay, J. Martínez-Jiménez, A. Uribe-Salas, A. Martínez-Luévanos
This paper compares the efficiency of D2EHPA and Cyanex 272 to extract the divalent manganese cation from an actual leaching solution obtained by reductive leaching of a low-grade pyrolusite ore, using SO2 gas. The studied variables were the extractant concen…
Miklós Gábor Balaton, Lajos Nagy, Ferenc Szeifert
In the manufacturing processes of high value-added products in the pharmaceutical, fine chemical polymer and food industry, insufficient control might produce off-grade products. This can cause significant financial losses, or in the pharmaceutical industry,…
Sandrine Hoppe, Dimitrios Meimaroglou, Mauricio Camargo, Christian Fonteix, Fernand Pla
This paper presents the implementation of two multicriteria optimization methods based on different approaches, namely, Rough Set Method (RSM) and Net Flow Method (NFM), to the manufacture by reactive extrusion of linear thermoplastic polyurethanes (TPUs), ap…
Leilei Li, Xin Chen, Xu Wang
In this paper, a CR-SRAM using new charge recycling scheme is described, novel bit-line pre-charge voltage distribution is proposed. The SRAM pre-charge voltage level is designed by logarithm instead of linear. The new design leads to improvement in speed com…
Xilin Min, Kaizhong Guo, Jize Huang
An error matrix equation based on error matrix theory was presented in previous research of the error-eliminating theory. The purpose of solving the error matrix equation is to create a decision support on how to switch from bad to good status. A matrix based…
Wei Lin, Guozheng Yan
This paper proposes an anchoring and extending micro intestinal robot for medical inspection and surgery propose. The three-leg anchoring method is discussed in detail, and micro robot phantom model is used to test anchoring related parameters for mechanical…
No articles in this issue.
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).