ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu…
Joongu Kang
Because of the complex nature of the changes in the current and movement of the riverbeds by bridge scouring, it is impossible to understand or predict these changes. In order to have a reliable data, it is critical to have the current methods and equipment f…
Osama Bedair
A design procedure is presented to estimate the load carrying capacity of beam-column channel sections. A reduced cross-section is used to compensate for the reduction in the post-buckling stiffness. The non-linear stress distribution acting on the entire cha…
Mahdi Rasouli Maleki, Mohammad Mahyar, Kambiz Meshkabadi
In engineering projects associated with rock mechanic science like open pit mines, assessment and slope stability of mine walls is one of the important performance in generate of these structures. Estimating and knowledge of stable slope angle is one of main…
A. Jeya Saravanan, C. P. Karthikeyan, Anand A. Samuel
The influence of wake parameters on the exergy analysis of single array wind farm is studied in this paper. Key parameters which influence wake effects in a wind farm are wind velocity, tip speed ratio, number of blades, rotor speed, rotor diameter and hub he…
Shu-Hung Yeh, Liu-Ho Chiu, Heng Chang
The effects of the nitrided case produced by gas nitriding processes on the mechanical and corrosion resistance properties of the JIS SACM 645 steel were studied in this paper. JIS SACM 645 steel specimens with different substrate hardness were gas nitrided a…
Rashmi Uddanwadiker
Crane Hooks are highly liable components and are always subjected to failure due to accumulation of large amount of stresses which can eventually lead to its failure. To study the stress pattern of crane hook in its loaded condition, a solid model of crane ho…
Idriss Amara, Embarek Ferkous, Fayçal Bentaleb, Razika Aouad
This work presents an experimental study to describe a wear zone in the P40 cutting tools used during a dry lathing. Mechanics of cutting has been presented to investigate the effects of edge geometry of the cutting tool carbide cutting insert. In the field o…
Adavi Balakrishna, G. Ravi Chandra, Balakrishna Gogulamudi, Chinta Someswararao
The selection of proper materials for a structural component is critical in engineering design. Existing design procedures may currently be sufficient, especially where experience exists, but fierce industrial competition is spurring the search for improved m…
Arturo Reyes-León, Miguel Toledo Velázquez, Pedro Quinto-Diez, Florencio Sánchez-Silva, Juan Abugaber-Francis, Celerino Reséndiz-Rosas
A relation between heat transferred and energy loss, for turbulent flow. In different tube arrangements, is made. The conditions are determined which decide the dimensions and velocities for a heat exchanger. Also, a reference to the economic dimensioning of…
S. Ghasemi
Tsunamis are among the most terrifying natural hazards known to man and have been responsible for tre-mendous loss of life and property throughout history. In this paper by means of dimensional analysis, important non-dimensional groups in Tsunamis was studie…
No articles in this issue.
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).