ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu…
Ahmad Reza Fazeli
Creep feed grinding is a recently invented process of material handling. It combines high quality of the piece surface, productivity, and the possibility of automatic control. The main objectives of this research is to study the influences of major process pa…
P. Loganathan, P. Puvi Arasu
Natural convective boundary layer flow and heat and mass transfer of a fluid with variable viscosity and thermal radiation over a vertical stretching surface in the presence of suction/injection is investigated by Lie group analysis. Fluid viscosity is assume…
Chao Liu, Yanbo Li, Yiping Zeng
In recent years, the narrow bandgap antimonide based compound semiconductors (ABCS) are widely regarded as the first candidate materials for fabrication of the third generation infrared photon detectors and integrated circuits with ultra-high speed and ultra-…
Huseyin Ademgil, Shyqyri Haxha, Fathi AbdelMalek
Highly nonlinear birefringent Photonic Crystal Fibre (PCF) that exhibits low losses and small effective mode area across a wide wavelength range has been presented. The effects of angular orientation on bending losses of the proposed PCFs have been thoroughly…
Chao Zhu, Xiaoyu Wu, Yuan Wu, Gongying Liang
The initial oxidation behavior of Ni-6.5Co-17.8Cr-3.7Al-0.5Y alloy is investigated at 800°C-1000°C. X-ray diffraction results show that the dominant Cr2O3 phase and secondary α-Al2O3 and NiO phases are observed on the surface of samples at all initial stages…
Tomaž Hozjan, Miran Saje, Igor Planinc, Stanislav Srpčič, Sebastjan Bratina
The present paper investigates fire resistance of a simply-supported composite concrete-trapezoidal steel sheet slab. The objective is to find out if a steel sheet, as a moisture diffusion barrier, may substantially effect the hydro-thermal situation in the c…
Kanagalasara Vathsala, Thimmappa Venkatarangaiah Venkatesha, Beekanahalli Mokshanatha Praveen, Kudlur Onkarappa Nayana
A Zinc-Chitosan composite coating was generated on mild steel from zinc sulphate-sodium chloride electrolyte by electrodeposition. The electrolyte constituents were optimized for good composite coating. The corrosion resistance behavior of the composite was e…
Pablo Vizcaíno, Cintia Paola Fagundez, Abraham David Banchik
In the present work, the expansion coefficient due to hydrogen incorporation was measured for the axial direction of a Zircaloy-4 cooling channel, similar to that installed in the Atucha I PHWR, Argentina, trying to simulate the nuclear power reactor operatin…
Hossam Hodhod, Mostafa A. M. Abdeen
Quality of cement is evaluated via group of tests. The most important, and close to understanding, is the compressive strength test. Recently, Egyptian standards adopted the European standards EN-196 and EN-197 for specifying and evaluating quality of cements…
Xiaorong Xiang, Bo Liu, Liqing Qiao, Qingwei Wang
In this paper, we investigate the stator wake variability along the axial direction under different rotating speeds and mass flow conditions, in the terms of wake-core position, wake depth, wake width and wake velocity gradient. Experimental study is carried…
No articles in this issue.
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).