ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu…
Mohammad A. K. Alia, Tariq Younes, Hussein Sarhan
In this work an experimental investigation was carried out in order to explore the possibility of realizing a domestic heating system by throttling hydraulic oil. Considering the continuous increasing price of diesel oil, this work gains unique importance. Ge…
D. Philip Selvaraj, P. Chandramohan
This paper presents the results of experimental work carried out in dry turning of cast duplex stainless steels (ASTM A 995 Grade4A and ASTM A 995 Grade5A) using TiC and TiCN coated cemented carbide cutting tools. The turning tests were conducted at five diff…
Vadugapalayam Ponnuvel Sakthivel, Ramachandran Bhuvaneswari, Srikrishna Subramanian
the paper has been removed due to the authors' personal reason.
Jean-Luc Marcelin
This paper offers an integrated optimization of mechanisms with genetic algorithm, the principle of which is to use a neural network as a global calculation program and to couple the network with stochastic methods of optimization. In other words, this paper…
Sunita Rani, Raman Kumar, Sarva Jit Singh
The aim of this note is to study the effect of negative Poisson’s ratio on the quasi-static deformation of a poroelastic half-space with anisotropic permeability and compressible fluid and solid constituents by surface loads. Two particular cases considered a…
M. Almansba, K. Saanouni, N. E. Hannachi
This paper presents a simple damage-gradient based elastoplastic model with non linear isotropic hardening in order to regularize the associated initial and boundary value problem (IBVP). Using the total energy equivalence hypothesis, fully coupled constituti…
Mostafa A. M. Abdeen, Hossam Hodhod
The developments in the field of construction raise the need for concrete with less weight. This is beneficial for different applications starting from the less load applied to foundations and soil till the reduction of carnage capacity required for lifting p…
Huanlao Liu, Xiaoning Xue, Guangyu Tan
The position errors in the axis direction of a vertical machine center have been measured by means of the VM101 linear encored measurement system. The character of the backlash error is discussed; results show that the backlash error has great influence on th…
Rory Wolf, Amelia Carolina Sparavigna
There are many current and emerging wetting and adhesion issues which require an additional surface processing to enhance interfacial surface properties. Materials which are non-polar, such as polymers, have low surface energy and therefore typically require…
Edmilson O. Correa, Reginaldo P. Barbosa, Augusto J. A. Buschinelli, Eduardo M. Silva
The effect of clad metal composition on stress corrosion cracking (SCC) behavior of three types of SMAW filler metals (E308L-16, E309-16 and E316L-16), used for cladding components subjected to highly corrosive conditions, was investigated in boiling 43% MgCl…
No articles in this issue.
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).