ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu…
Emil Pop, Gabriel-Ioan Ilcea, Ionut-Alin Popa, Lorand Bogdanffy
This paper deals with the increasing safety of working in aggressive potential locations, having SCADA system and WSN sensors, using a “probabilistic strategy” in comparison with a “deterministic” one, modeling/simulation and application in underground coal m…
Justin M. Jeremiah, Samwel V. Manyele, Abraham K. Temu, Jesse-X. Zhu
An experimental study of the gas-solid flow dynamics in the high-flux CFB riser was accomplished by analysing the scaling regions from solid concentration signals collected from a 76 mm internal diameters and 10 m high riser of a circulating fluidized bed (CF…
L. Eljamali, A. Wakif, Z. Boulahia, M. Zaydan, R. Sehaqui
Effects of the form factor on natural convection heat transfer and fluid flow in a two-dimensional cavity filled with Al 2 O 3 -nanofluid has been analyzed numerically. A model was developed to explain the behavior of nanofluids taking account of the volume f…
Ghazwan Ahmed Dahham, Saad Tawfik Muhamed, Shamel Mohammed Saleh
Field an experiment was carried out in the farms of Agriculture and forestry academy at University in Nineveh. The research was conducted to investigate a practical study for the effect of four forward speeds (1.9, 2.6, 3.8 and 4.7 km/hr.) and three accelerat…
Scott Cash, Quan Zhou, Oluremi Olatunbosun, Hongming Xu, Sean Davis, Robin Shaw
The work presented in this paper is a progression to previous research which developed an overcurrent-tolerant prediction model. This paper presents some of the modelling and development techniques used for the previous research, but more emphasis is placed o…
Adil Loya, Ammar Iqbal, Muhammad Tauseef Nasir, Hasan Ali, Muhammad Zia Ullah Khan, Muhammad Imran
Aerodynamics analysis has become a mindset for high performance vehicles. This is because it provides valuable insight on a vehicle motion during different phases. There are vast varieties of software available like ANSYS Workbench, Star CCM+, Autodesk Simula…
Sultana Nasrin Baby, Colin Arrowsmith, Nadhir Al-Ansari
Water is a basic normal asset for supporting the condition of life. Accessible water assets are feeling the squeeze because of expanding demand. Soon water, which we have depended upon to be accessible and an unconditional present of nature will turn into a r…
Rino Apicella, Vittorio Romano
Microwave heating of liquid foods in laminar flow through a circular tube has been modeled. In particular, skim milk as a Newtonian fluid and apple sauce and tomato sauce as non-Newtonian fluids have been considered. The temperature profiles have been obtaine…
Leonardo Di G. Sigalotti, Jaime Klapp, Karla Pedroza, Edgar Nathal, Carlos E. Alvarado-Rodríguez
We present numerical simulations of blood flow through a brain vascular aneurysm with an artificial stent using Smoothed Particle Hydrodynamics (SPH). The aim of this work is to analyze how the flow into an aneurysm changes using different stent configuration…
Chukwuemeka Odoemelam, Joseph Ifeanyi Achebo, Jacob Odeh Ehiorobo, John Osadolor Osaremwinda
The shape of the fusion zone after weld in terms of its width-to-depth ratio is known as the aspect ratio, large aspect ratios in welded joints usually results in cracks formation during solidification of the weld; it also results in tensile residual stresses…
No articles in this issue.
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).