ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu…
Yong Cheng, Wen You, Chaoyong Zhang, Huanhuan Li, Jian Hu
Nowadays, sawdust has been widely regarded as a sand replacement material to produce sawdust concrete. This thesis uses orthogonal test to analyze the mechanical and heat preservation as well as heat insulation property with the sawdust replacement ratio of 0…
Hae-Eun Lee, Chanjoo Lee, Youg-Jeon Kim, Ji-Sung Kim, Won Kim
While log law is an equation theoretically derived for near-bed region, in most cases, power law has been researched by experimental methods. Thus, many consider it as an empirical equation and fixed power law exponents such as 1/6 and 1/7 are generally appli…
Changhua Huang, Guyong Han, Man Liu, Song Lu
A visualization system for the official and scientific management has been designed on C++. By this system , the infor mation of database has been shown to users intuitively, which makes it possible for users to be free from the data sea. The system can reali…
Raimund K. Ege
Multimedia content delivery to capable smart phones with high-speed next-generation Internet connectivity is becoming commonplace. However, the openness of delivery demands adaptive and robust management of intellectual property rights. The purpose of this ar…
Jong Sup Park, Woo Tai Jung, Jae Yoon Kang, Moon Seoung Kum
This paper examines the shear stress and displacement occurring in CFRP tendons through finite element analysis on the parameters influencing the anchoring performance to evaluate the behavioral characteristics of the bonded type anchorage for CFRP tendon. Th…
Jae Yoon Kang, Jong Sup Park, Woo Tai Jung, Moon Seoung Kum
This paper presents the parametric analysis conducted to derive the optimal dimensions of the steel sleeve necessary to secure the bond performance of the swaging type anchorage for CFRP tendon with diameter of 5 mm. To that goal, finite element analysis is p…
Toshifumi Sugama, Tatiana Pyatina
The study focused on investigating the effectiveness of functional acrylic polymer (AP) in improving the ability of air foamed sodium silicate-activated calcium aluminate/Class F fly ash cement (slurry density of ￡ 1.3 g/cm 3 ) to mitigate the corrosion of ca…
Jeong-Rae Cho, Young Jin Kim, Jong-Won Kwark, Sung Yong Park, Won Jong Chin, Byung-Suk Kim
This paper presents the results of fatigue performance tests performed up to 10 million cycles on a load-measuring pot bearing with built-in load cell to verify its field applicability and proposes an empirical temperature correction formula. In Part I of thi…
Nurudeen A. Raji, Oluleke O. Oluwole
Drawn low carbon steel is characterized by brittle fracture. These defects are associated with the poor ductility and high strain hardening due to the cold work. There is a need therefore to determine optimum heat treatment parameters that could ensure improv…
Dong-Woo Seo, Ki-Tae Park, Young-Jun You, Hyeong-Yeol Kim
Fiber reinforced polymer (FRP) reinforcing bars for concrete structure has been extensively investigated for last two decades and a number of FRP bars are commercially available. However, one of shortcomings of the existing FRP bars is its low elastic modulus…
No articles in this issue.
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).