ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu…
Noraini Abdul Samad, Rubita Sudirman, Nasrul Humaimi Mahmood, Yoong Yee Yan
Even with the development of more advanced technology of ECG, there are still problems on interference to ECG signals. Many attempts have been made to detect and eliminate the source of noises and artifacts from the original ECG signals. Several studies have…
Liuli Lu, Zhibin Liu, Haohan Liu, Yongqin Yan
Romashkino oil field has large oilfield area, small formation dip, many reservoir layers, wide oil-water transition zone and complicated sedimentary environment. Since development, 3 overall development plannings and adjustments of individual block have been…
Palaniyandi Kamatchi, Gunturi Venkata Ramana, Ashok Kumar Nagpal, Nagesh R. Iyer
buildings located at rock sites. Modelling wave propagation through soil medium helps to derive the primary and secondary wave velocities. Most of the time soil mediums are heterogeneous, layered and undergoes nonlinear strains even under weak excitation. The…
Abdelouahhab Jabri, Abdellah El Barkany, Ahmed El Khalfi
In this paper we present a multi-optimization technique based on genetic algorithms to search optimal cuttings parameters such as cutting depth, feed rate and cutting speed of multi-pass turning processes. Tow objective functions are simultaneously optimized…
Robert N. K. Loh, Witt Thanom, Jan S. Pyko, Anson Lee
Electronic throttle control (ETC) system has worked its way to becoming a standard subsystem in most of the current automobiles as it has contributed much to the improvement of fuel economy, emissions, drivability and safety. Precision control of the subsyste…
William Wanasolo, Samwel Victor Manyele, John Makunza
A kinetic study of biogas production from Urban Solid Waste (USW) generated in Dar es Salaam city (Tanzania) is presented. An experimental bioreactor simulating mesophilic conditions of most USW landfills was developed. The goal of the study was to generate t…
Kelvii Wei Guo
Investigation was to study the influence of pulse-impact on microstructure of Liquid-Phase-Pulse-Impact Diffusion Welding (LPPIDW) welded joints of aluminum matrix composite SiC p /A356, SiC p /6061Al, Al 2 O 3p /6061Al. Results showed that under the effect o…
Yufen Zhang, Zhiquan Zhang
Lime-fly ash loess is composed of fly ash, lime and loess. It is a new material in subgrade backfill. Main factors to influence the strength of lime-fly ash loess are age, amount of fly ash and lime, ratio of fly ash to lime (1:K), and moisture content. In or…
Waheed Sami Abushanab
In this paper, a reliable and sensitive diagnostic method for oil pipelines based on wavelet analysis and ultrasonic technique. This will be achieved by the use of 3-D finite element modeling software (Abaqus CAE 6.10) combined with a power full wavelet based…
Oludele Adeyefa, Oluleke Oluwole
All real physical structures behave dynamically when subjected to loads or displacements. This research paper, therefore, presents seismic response of field fabricated liquefied natural gas spherical storage vessels using finite element analysis. The seismic…
No articles in this issue.
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).