Grounding Locations Assessment of Practical Power System
- 1
- 2
- 3
Abstract
Grounding Points (GPs) are installed in electrical power system to drive protective devices and accomplish the person nel safety. The general grounding problem is to find the optimal locations of these points so that the security and reli ability of power system can be improved. This paper presents a practical approach to find the optimal location of GPs based on the ratios of zero sequence reactance with positive sequence reactance (X0/X1), zero sequence resistance with positive sequence reactance (R0/X1) and Ground Fault Factor (GFF). The optimal values of these indicators were deter-mined by considering several scenarios of fault disturbances such as single line to ground on a selected area of the Iraqi National Grid (132 KV) taking into account the statue of GPs for transformers in the other substations. From the presented results in this paper, it is noted that GFF calculated for some substations could be used to measure the effectiveness of GPs. However, the operated time of relay can be taken as a criterion of this measurement for selecting the best location of GPs.
- J. Sykes, V. Madani, J. Burger, M. Adamiak and W. Premerlani, “Reliability of Protection Systems (What Are The Real Concerns),” Proceeding of IEEE conference on Protective Relay Engineers, College Station, 29 March-1 April 2010, pp. 1-16.
- D. Jacob and K. Nithiyananthan, “Effective Methods for Power Systems Grounding,” WSEAS Transactions on Business and Economics, Vol. 5, No. 1, 2008, pp. 151- 160.
- D. D. Shipp and F. J. Angelini, “Characteristics of Different Power Systems Neutral Grounding Techniques: Facts and Fiction,” IEEE Industry Technical Conference, Seattle, 18-22 June 1990, pp. 107-116.
- D. Paul and S. I. Venugopalan, “Low-Resistance Grounding Method for Medium Voltage Power Systems,” Industry Applications Society Annual Meeting of IEEE Conference, Dearborn, 28 September-4 October 1991, pp. 1571-1578.
- J. Roberts and J. H. Aituve, “Review of Ground Fault Protection Methods for Grounded, Ungrounded, and Compensated Distribution Systems,” SEL, 2001.
- S. Hanninen, “Single Phase Earth Faults in High Impedance Grounded Networks Characteristics, Indication and Location,” Valtion Teknillinen Tutkimuskeskus Technical Re- search Centre of Finland, Espoo, 2001.
- L. A. Kojovic, T. R. Day and H. H. Chu, “Effectiveness of Restricted Ground Fault Protection with Different Relay Types,” Power Engineering Society General Meeting, IEEE, 13-17 July 2003, pp. 1-6.
- M. Jinxi and F. P. Dawalibi, “Grounding Analysis of a Large Electric Power Station,” IEEE International Conference on Power System Technology, Chongqing, 22-26 October 2006, pp. 1-6.
- J. C. Whitaker, “AC Power Systems Handbook,” CRC Press LLC, Boca Raton, 1999.
- BA THS/BU Transmission Systems and Substation, “Protection Application Handbook,” ABB Support, 1990.
- C. R. Bayliss, “Transmission and Distribution Electrical Engineering,” Antony Rowe Ltd., Chippenham, 2005.
- E. Lakervi and E. J. Holmes, “Electricity Distribution Network Design,” England Short Run Press Ltd., Exeter, 2003.
- H. Saadat, “Power System Analysis,” McGraw-Hill, New York, 1999.
- K. C. Agrawal, “Industrial Power Engineering and Applications Handbook,” University of Michigan, Ann Arbor, 2001.
- Y. Y. Wang and X. J. Zeng, “Grourding Faurt Protection with Sampling Value Difference in Ineffectively Earthed Power Systems,” International Conference on Power System Technology, Chongqing, 22-26 October 2006. doi:10.1109/ICPST.2006.321438