Analysis and Design of Derivative Free Filters against Derivative Based Filter on the Simulated Model of a Three Phase Induction Motor
- 1
- 2
- 3
Abstract
Recursive state estimation methods have aroused substantial attraction among many researchers and in particular, the drives research fraternity has shown increased interest in recent years. State estimators that surrogate direct measurements play an integral part in the operation of modern a.c. drives. Their robustness and accuracy are very much decisive for the performance of the drive. In this paper, a comparative analysis of the three nonlinear filtering schemes to estimate the states of a three phase induction motor on the simulated model is presented. The efficacy of Ensemble Kalman Filter (EnKF) against the traditional Jacobian based Filter or Extended Kalman Filter (EKF) and almost forbidden, hitherto least-attempted Unscented Kalman Filter (UKF) is very much exemplified. Theoretical aspects and comparative simulation results are investigated comprehensively with respect to three different scenarios viz., step changes in load torque, speed reversal, and low speed operation. Also, “Monte Carlo Simulation” runs have been exploited very extensively to show the superior practical usefulness of EnKF, by which the minimum mean square error (MMSE), which is often used as the performance index, ostensibly gets mitigated very radically by the proposed approach. The results throw light on alleviating the intrinsic intricacies encountered in EKF in parlance with the observer theory.
- P. Vas, “Sensorless Vector and Direct Torque Control,” Oxford University Press, New York, 1998.
- M. Burat, S. Bogosyan and M. Gokasan, “Speed Sensorless Estimation for Induction Motors Using Extended Kalman Filters,” IEEE Transactions on Industrial Electronics, Vol. 54, No. 1, February 2007, pp. 272-280.
- M. Burat, S. Bogosyan and M. Gokasan, “Braided Extended Kalman Filters for Sensorless Estimation in Induction Motors at High-low/Zero Speed,” IET Control Theory & Applications, Vol. 1, No. 4, 2007, pp. 987-998.
- M. Burat, S. Bogosyan and M. Gokasan, “Speed Sensorless Direct Torque Control of IMs with Rotor Resistance Estimation,” Energy Conversion and Management, Vol. 46, No. 3, 2005, pp. 335-349.
- M. Burat, S. Bogosyan and M. Gokasan, “An EKF Based Estimator for Speed Sensorless Vector Control of Induction Motors,” Electric Power Components and Systems, Vol. 33, No. 7, 2005, pp. 727-744.
- J. Holtz, “Sensorless Control of Induction Machines with or without Signal Injection?” IEEE Transactions on Industrial Electronics, Vol. 53, No. 1, February 2006, pp. 7-30.
- J. W. Finch, D. J. Atkinson and P. P. Acarnley, “Full- Order Estimator for Induction Motor States and Parameters,” IEE Electric Power Applications, Vol. 145, No. 3, May 1998, pp. 169-179.
- C. Lascu, I. Boldea and F. Blaabjerg, “Comparitive Study of Adaptive and Inherently Sensorless Observers for Variable Speed Induction Motor Drives,” IEEE Transactions on Industrial Electronics, Vol. 53, No. 1, February 2006, pp. 57-65.
- G. G. Soto, E. Mendes and A. Razek, “Reduced-Order Observers for Rotor Flux, Rotor Resistance and Speed Estimation for Vector Controlled Induction Motor Drive Using the Extended Kalman Filter Technique,” IEE Proceedings Electric Power Applications, Vol. 146, No. 3, May 1999.
- H.-W. Kim and S.-K. Sul, “A New Motor Speed Estimator Using Kalman Filter in Low-Speed Range,” IEEE Transactions on Industrial Electronics, Vol. 43, No. 4, August 1996, pp. 498-504.
- D. J. Atkinson, J. W. Finch and P. P. Acarnley, “Estimation of Rotor Resistance in Induction Motors,” IEE Proceedings Electric Power Applications, Vol. 146, No. 3, January 1996.
- K. L. Shi, T. F. Chan, Y. K. Wong and S. L. Ho, “Speed Sensorless Control of an Induction Motor Drive Using an Optimized Extended Kalman Filter,” IEEE Transactions on Industrial Electronics, Vol. 49, No. 1, February 2002, pp. 124-133.