Modelling of bidirectional full bridge DC-DC converter as one of the most applicable converters has received significant attention. Mathematical modelling reduces the simulation time in comparison with detailed circuit response; moreover it is convenient for controller design purpose. Due to simple and effective methodology, average state space is the most common method among the modelling methods. In this paper a bidirectional full bridge converter is modelled by average state space and for each mode of operations a controller is designed. Attained mathematical model results are in a close agreement with detailed circuit simulation.
KeywordsAverage State SpaceBidirectionalDetailed Circuit SimulationFull Bridge DC-DC ConverterMathematical Modeling
T. Mishima, E. Hiraki, T. Tanaka and M. Nakaoka, “A New Soft-Switched Bidirectional DC-DC Converter Topology for Automotive High Voltage DC Bus Architectures,” IEEE Vehicle Power and Propulsion Conference, Windsor, 6-8 September, 2006, pp. 1-6. doi:10.1109/VPPC.2006.364281
A. Edith Navarro, P. Perol, Enrique, J. Dede and F. Javier, Hurtado, “A New Efficiency Low Mass Bidirectional Battery Discharger-Charger Regulator for Low Voltage Batteries”, 27th Annual IEEE Power Electronics Specialists Conference, Baveno, 23-27 June 1996, pp. 842-845. doi:10.1109/PESC.1996.548679
E.-S Kim, K.-Y Joe, H.-Y Choi, Y.-H Kim and Y.-H Cho, “An Improved Soft Switching Bi-Directional PSPWM FB DC/DC Converter,” Proceedings of the 24th Annual Conference of Industrial Electronics Society, Aachen, 31 August-4 September1998, pp. 740-743. doi:10.1109/IECON.1998.724185
H. L Chan, K. W. E. Cheng and D. Suatanto, “A Novel Square-Wave Converter with Bidirectional Power Flow,” Proceedings of the International Conference on Power Electronics and Drive Systems, Hohg Kong, 27-29 July 1999, pp. 966-971. doi:10.1109/PEDS.1999.792839
M. Jain, P. K. Jain and M. Daniele, “Analysis of A Bidirectional DC-DC Converter Topology for Low Power Application,” IEEE Canadian Conference on Electrical and Computer Engineering, St. Johns, 25-28 May 1997, pp. 548-551. doi:10.1109/CCECE.1997.608283
K. Venkatesan, “Current Mode Controlled Bideirectional Flyback Converter,” 20th Annual IEEE Power Electronics Specialists Conference, Milwaukee, 26-29 June 1989, pp. 835-842. doi:10.1109/PESC.1989.48567
T. Reimann, S. Szeponik, G. Berger and J. Petzoldt, “A Novel Control Principle of Bidirectional DC-DC Power Conversion,” 28th Annual IEEE Power Electronics Specialists Conference, St. Louis, 22-27 June 1997, pp. 978-984. doi:10.1109/PESC.1997.616843
M. K. Kazimierczuk,D. Q. Vuong, B. T. Nguyen and J. A. Weimer, “Topologies of Bidirectional PWM DC-DC Power Converter,” Proceedings of the IEEE National Aerospace and Electronics Conference, Dayton, 24-28 May 1993, pp. 435-441. doi:10.1109/NAECON.1993.290953
N. M. L. Tan, T. Abe and H. Akagi, “Topology and Application of Bidirectional Isolated DC-DC Converters,” IEEE 8th International Conference on Power Elec- tronics and ECCE Asia, Jeju, 30 May-3 June 2011, pp. 1039-1046. doi:10.1109/ICPE.2011.5944690
R. W. Erickson and D. Maksimovic, “Fundamental of Power Electronics,” 2nd Edition, Kluwer Academic Publishers, Alphen aan den Rijn, 2001.
T. Mishima, E. Hiraki, T. Tanaka and M. Nakaoka, “High Frequency Link Symmetrical Active Edge Resonant Snubbers-Assisted ZCS-PWM DC-DC Converter,” Electric Power Applications, Vol. 1, No. 6, 2007, pp. 907- 914. doi:10.1049/iet-epa:20060508
C. Zhao, S. D. Round and J. W. Kolar, “Full-Order Averaging Modeling of Zero-Voltage Switching Phase-Shift Bidirectional DC-DC Converters,” Power Electronics, Vol. 3, No. 3, 2010, pp. 400-410. doi:10.1049/iet-pel.2008.0208
F. Krismer and J. W. Kolar, “Accurate Small-Signal Model for the Digital Control of an Automotive Bidirectional Dual Active Bridge,” IEEE Transactions on Power Electronics, Vol. 24, No. 12, 2009, pp. 2756-2768. doi:10.1109/TPEL.2009.2027904
P. Jain and J. E. Quaicoe, “Generalized Modeling of Constant Frequency DC/DC Resonant Converter Topologies,” 14th International Telecommunications Energy Conference, Washington DC, 4-8 October 1992, pp. 180-185. doi:10.1109/INTLEC.1992.268444
L. A. Aguirre, P. F. Donoso-Garcia and R. Santos-Filho, “Use of a Priori Information in the Identification of Global Nonlinear Models—A Case Study Using a Buck Converter,” IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, Vol. 47, No. 7, 2000, pp. 1081-1085. doi:10.1109/81.855463
K. T. Chau and C. C. Chan, “Nonlinear Identification of Power Electronics Systems,” Proceedings of International Conference on Power Electronics and Drive Systems, Singapore, 21-24 February 1995, pp. 329-334. doi:10.1109/PEDS.1995.404900
F. Alonge, F. D’Ippolito, F. M. Raimondi and S. Tumminaro, “Nonlinear Modeling of DC/DC Converters Using the Hammerstein’s Approach,” IEEE Transactions on Power Electronics, Vol. 22, No. 4, 2007, pp. 1210-1221. doi:10.1109/TPEL.2007.900551
F. Alonge, F. D’Ippolito and T. Cangemi, “Hammerstein Model-Based Robust Control of DC/DC Converters,” 7th International Conference on Power Electronics and Drive Systems, Bangkok, 27-30 November 2007, pp. 754-762. doi:10.1109/PEDS.2007.4487788
V. Vorperian, R. Tymerski and F. C. Lee, “Equivalent Circuit Model for Resonant and PWM Switches,” IEEE Transactions on Power Electronics, Vol. 4, No. 2, 1989, pp. 205-214. doi:10.1109/63.24905
V. Vorperian, “Simplified Analysis of PWM Converter Using the Model of the PWM Switch: part I and II,” IEEE Transactions on Aerospace and Electronic Systems, Vol. 26, No. 3, 1990, pp. 497-505. doi:10.1109/7.106127
R. D. Middlebrook and S. Cuk, “A General Unified Approach to Modeling Switching Converter Power Stages,” International Journal of Electronics, Vol. 42, No. 6, 1977, pp. 521-550. doi:10.1080/00207217708900678
S.-P. Hsu, A. Brown, L. Rensink and R. D. Middle-Brook, “Modeling and Analysis of Switching DC-to-DC Converters in Constant-Frequency Current Programmed Mode”, Power Electronics Specialists Conference, San Diego, 18-22 June 1979, pp. 284-301.
S. Cuk, “Modeling, Analysis, and Design of Switching Converters,” Ph.D. Thesis, California Institute of Technology, Pasadena, 1976.
L. Zhu, “A Novel Soft-Commutating Isolated Boost Full-Bridge ZVS-PWM DC-DC Converter for Bidirectional High Power Applications,” IEEE Transactions on Power Electronics, Vol. 21, No. 2, 2004, pp. 422-429. doi:10.1109/TPEL.2005.869730
R. Li , A. Pottharst, N. Frohleke and J. Bocker, “Analysis and Design of Improved Isolated Full-Bridge Bidirectional DC-DC Converter,” 35th Annual Power Electronics Specialists Conference, Aachen, 20-25 June 2004, pp. 521- 526. doi:10.1109/PESC.2004.1355801
R. B. Ridley, “A New, Continuous-Time Model for Current Mode Control,” IEEE Transactions on Power Elec- tronics, Vol. 6, No. 2, 1991, pp. 271-280. doi:10.1109/63.76813
L. Peng, B. Lehman, “A Design Method for Paralleling Current Mode Controlled DC-DC Converters,” IEEE Transactions on Power Electronics, Vol. 19, No. 3, 2004, pp 748-756. doi:10.1109/TPEL.2004.826497
R. Sheehan, “Understanding and Applying Current-Mode Control Theory,” Power Electronics Technology Exhibition and Conference, Dallas, 30 October-1 November,2007, pp. 1-26.
D. E. Seborg, T. F. Edgar and D. A. Millichamp, “Process Dynamics and Control,” 2nd Edition, John Wiley and Sons Inc., New York, 2004.
L. Dixon, “Average Current Mode Control of Switching Power Supplies,” Unitrode Application Note, No. 3, pp. 356-369.