Investigating the Use of <i>Jatropha</i> Biodiesel in Compression Ignition Engines by Comparing Effects of Storage Time on Its Properties with the Standard Properties of Fossil-Diesel and Properties of Quality Biodiesel
- 1 Chemical Engineering Department, Copperbelt University, Kitwe, Zambia
Abstract
Effects of storage time on some properties of jatropha biodiesel were investigated over the storage time of 0 to 8 weeks at the temperature of 25℃. Such properties as water content and density were found to increase at the rates of 5 ppm and 14 kg/m3 per week respectively. These rates translate into property values which compare closely with the standard properties of fossil-diesel and properties of quality biodiesel. As a result, the jatropha biodiesel can be used as alternative fuel to fossil-diesel in compression ignition engines within 8 weeks of its production. However, the calorific value and flash point of the biodiesel decreased at the rate of 1.4℃ and 2.5 MJ/kg per week respectively. Although the flash point was within the acceptable level for quality biodiesel, the calorific values were abnormally higher than the values for quality biodiesel of about 38.7 MJ/kg. With the exception of the calorific values, the other properties were not reasonably affected.
- A. Demirbas, “Progress and Recent Trends in Biodiesel Fuels,” Energy Conversion and Management, Vol. 50, No. 1, 2008, pp. 14-34. doi:10.1016/j.enconman.2008.09.001
- M. A. Fazal, A. S. M. A. Haseeb and H. H. Masjuki, “Biodiesel Feasibility Study: An Evaluation of Material Capability; Performance; Emission and Engine Performance,” Renewable and Sustainable Energy Reviews, Vol. 15, No. 2, 2010, pp. 1314-1324. doi:10.1016/j.rser.2010.10.004
- M. S. Graboski and R. L. McCormik, “Combustion of Fat and Vegetable Oil Derived Fuels in Diesel Engines,” Progress in Energy and Combustion Science, Vol. 24, No. 2, 1997, pp. 125-164. doi:10.1016/S0360-1285(97)00034-8
- M. Canakci, “A Pilot Plant to Produce Biodiesel from High Free Fatty Acid Feedstocks,” ASAE Annual International Meeting, Sacramento, 30 July August 1, 2001, pp. 1-29.
- D. Y. C. Leung, B. C. P. Koo and Y. Guo, “Degradation of Biodiesel under Different Storage Conditions,” Bioresource Technology, Vol. 97, No. 2, 2005, pp. 250-256. doi:10.1016/j.biortech.2005.02.006
- M. B. Oliveira, F. R. Varanda and I. M. Marrucho, “Prediction of Water Solubility in Biodiesel with CPA Equation of State,” Industrial and Engineering Chemistry Re- search, Vol. 47, No. 12, 2008, pp. 4278-4285. hdoi:10.1021/ie800018x
- S. Fernando, et al., “Effect of Incompletely Converted Soybean Oil on Biodiesel Quality,” Energy, Vol. 32, No. 5, 2006, pp. 844-851. doi:10.1016/j.energy.2006.06.019
- A. Demirbas, “Calculation of Higher Heating Values of Biomass Fuels,” Fuel, Vol. 76, No. 5, 1997, pp. 431-434. doi:10.1016/S0016-2361(97)85520-2
- I. M. Atadashi, M. K. Aroua and A. A. Aziz, “High Quality Biodiesel and Its Diesel Engine Application: A Review,” Renewable and Sustainable Energy Reviews, Vol. 14, No. 7, 2010, pp. 1999-2008. doi:10.1016/j.rser.2010.03.020
- S. A. Margolis and M. Levenson, “Certification by the Karl Fischer Method of the Water Content in SRM 2890, Water Saturated 1-Octanol, and the Analysis of Associated Interlaboratory Bias in the Measurement Process,” Fresenius Journal of Analytical Chemistry, Vol. 367, No. 1, 2000 pp. 1-7. doi:10.1007/s002160051589
- H. G. Midgley, “A Quick Method of Determining the Density of Liquid Mixtures,” Acta Crystallographica, Vol. 4, No. 8, 1951, p. 565. doi:10.1107/S0365110X51001835
- H. J. Liaw and Y.Y. Chiu, “A General Model for Pre- dicting the Flash Point of Miscible Mixtures,” Journal of Hazardous Materials, Vol. 137, No. 1, 2006, pp. 38-46. doi:10.1016/j.jhazmat.2006.01.078