Comprehensive Modulation and Classification of Faults and Analysis Their Effect in DC Side of Photovoltaic System
- 1 University of Picardie “Jules Verne”, Laboratory MIS (Modeling, Information & Systems), 33Rue Saint Leu, Amiens, 80039, France
- 2 University of Picardie “Jules Verne”, Laboratory MIS (Modeling, Information & Systems), 33Rue Saint Leu, Amiens, 80039, France
- 3 University of Picardie “Jules Verne”, Laboratory MIS (Modeling, Information & Systems), 33Rue Saint Leu, Amiens, 80039, France
Abstract
The first step in automatic supervision, condition monitoring and fault detection of photovoltaic system is recognition, exploration and classification of all possible faults that maybe happen in the system. This paper aims to perceive, classified, simulate and discus all electrical faults in DC side of photovoltaic system, regarding electrical voltage and current inspections. For that, simplified hybrid model of photovoltaic panel in MATLAB environment is used. Investigation and classification of each type of faults is down and the effects of the faults are illustrated in this paper. Flash test are applied to improved electrical model. Current-Voltage curves signature are interpreted and investigated in simulation environment.
- C. J. Huang, L. Y. Kang, Y. C. Jen, and C. S. Jen, “Design and Implementation of a Photovoltaic High-Intensity-Discharge Street Lighting System,” Power Electronics, IEEE Transactions, Vol. 26, No. 12, 2011, pp. 3464-3471. doi:10.1109/TPEL.2011.2116806
- M. Kolhe, “Techno-Economic Optimum Sizing of a Stand-Alone Solar Photovoltaic System,” Energy Conversion, IEEE Transactions on, Vol. 24, No. 2, 2009, pp. 511-519. doi:10.1109/TEC.2008.2001455
- N. Groom, “Analysis: Oil companies go solar to tap hard-to-get supplies,” Ed: USA Edition; Reuters, 2011.
- D. Solyali and M. A. Redfern, “Why Should Cyprus Exploit the Solar Power to Match its Peak Demand?” Universities' Power Engineering Conference (UPEC), Proceedings of 2011 46th International, 2011, pp. 1-6.
- P. Ducange, M. Fazzolari, B. Lazzerini and F. Marcelloni, “An Intelligent System for Detecting Faults in Photovoltaic Fields,” In Intelligent Systems Design and Applications (ISDA), 2011 11th International Conference on, 2011, pp. 1341-1346.
- S. Shojaee, M. Davarifar, M. H. Varahram and A. Davari, “Implementation of Remote Meter Reading Via Power Line,” In RCEE 2006,Gonabad Azad University, Iran, 2006.
- M. Davarifar, Z. Daneshi-Far and H. Fayyaz, “Implementation of Automate Remote Meter Reading (AMR) via BPL in Kish Island,” In International Power System Conference (PSC), 2009, Tehran, Iran., 2009.
- Y. Zhao, B. Lehman, J. F. DePalma, J. Mosesian and R. Lyons, “Fault Evolution in Photovoltaic Array during night-to-day Transition,” In Control and Modeling for Power Electronics (COMPEL), 2010 IEEE 12th Workshop on, 2010, pp. 1-6.
- T. Takashima, J. Yamaguchi and M. Ishida, “Disconnection Detection using Earth Capacitance Measurement in Photovoltaic Module String,” Progress in Photovoltaics: Research and Applications, Vol. 16, No. 8, 2008, pp. 669-677. doi:10.1002/pip.860
- S. Buddha, H. Braun, V. Krishnan, C. Tepedelenlioglu, A. Spanias, T. Yeider, et al., “Signal processing for photovoltaic applications,” in Emerging Signal Processing Applications (ESPA), 2012 IEEE International Conference on, 2012, pp. 115-118.
- Z. Ye, Y. Ling, B. Lehman, J. de Palma, J. Mosesian and R. Lyons, “Decision tree-based fault detection and classification in solar photovoltaic arrays,” in Applied Power Electronics Conference and Exposition (APEC), 2012 Twenty-Seventh Annual IEEE, 2012, pp. 93-99.
- M. Davarifar, A. Rabhi and A.Hajjaji, “Circuit Model Of PEM Fuel Cell For Energy Conversion Uses Renewable Energy System In Matlab,” in The International Renewable Energy Congress (IREC), Hammamet, Tunisia, December 2011.