A Comparison of the Use of Pyrolysis Oils in Diesel Engine
- 1 Department of Mechanical Engineering, Faculty of Engineering, Rajamangala University of Technology Phra Nakhon, Bangkok, Thailand
- 2 Department of Mechanical Engineering, Faculty of Engineering, Rajamangala University of Technology Phra Nakhon, Bangkok, Thailand
Abstract
Creating a sustainable energy and environment, alternative energy is needed to be developed instead of using fossil fuels. This research describe a comparison of the use of pyrolysis oils which are the tire pyrolysis oil, plastic pyrolysis oil and diesel oil in the assessment of engine performance, and feasibility analysis. Pyrolysis oils from waste tire and waste plastic are studied to apply with one cylinder multipurpose agriculture diesel engine. It is found that without engine modification, the tire pyrolysis offers better engine performance whereas the heating value of the plastic pyrolysis oil is higher. The plastic pyrolysis oil could improve performance by modifying engine. The economic analysis shows that the pyrolysis oil is able to replace diesel in terms of engine performance and energy output if the price of pyrolysis oil is not greater than 85% of diesel oil.
- D. Rutz, and R. Janssen, “Biofuel Technology Handbook,” WIP Renewable Energies, 2007.
- J. Scheirs and W. Kaminsky, “Feedstock Recycling and Pyrolysis of Waste Plastics: Converting Waste Plastics into Diesel and Other Fuels,” John Wiley & Sons Ltd., Chichester, 2006. doi:10.1002/0470021543
- S. Murugan, M. C. Ramaswamy and G. Narajan, “Performance, Emission and Combustion Studies of a DI Diesel Engine Using Distilled Tyre Pyrolysis Oil-Diesel Blends,” Fuel Processing Technology, Vol. 89, 2008, pp. 152-159. doi:10.1016/j.fuproc.2007.08.005
- M. Mani and G. Nagarajan, “Influence of Injection Timing on Performance, Emission and Combustion Characteristics of a DI Diesel Engine running on Waste Plastic Oil,” Energy, Vol. 34, 2009, pp. 1617-1623. doi:10.1016/j.energy.2009.07.010
- M. Mani, C. Subash and G. Nagarajan, “Performance, Emission and Combustion Characteristics of a DI Diesel Engine Using Waste Plastic Oil,” Applied Thermal Engineering, Vol. 29, 2009, pp. 2738-2744. doi:10.1016/j.applthermaleng.2009.01.007
- A. Demirbas, “Pyrolysis of Municipal Plastic Wastes for Recovery of Gasoline-Range Hydrocarbons,” Journal of Analytical and Applied Pyrolysis, Vol. 72, 2004, pp. 97-102. doi:10.1016/j.jaap.2004.03.001
- J. G. Rogers and J. G. Brammer, “Estimation of the Production Cost of Fast Pyrolysis Bio-Oil,” Biomass and Bioenergy, Vol. 36, 2012, pp.208-217. doi:10.1016/j.biombioe.2011.10.028
- R. W. J. Westerhout, M. P. Van Koningbruggen, A. G. J. Van Der Ham, J. A. M. Kuipers and W. P. M. Van Swaaij, “Techno-Economic Evaluation of High Temperature Pyrolysis Processesfor Mixed Plastic Waste,” Trans IChemE, Vol. 76, Part A, March 1998, pp. 427-439.
- M. R. Islam, M. U. H. Joardder, S. M. Hasan, K. Takai and H. Haniu, “Feasibility Study of Thermal Treatment of Solid Tire Wastes in Bangladesh by Using Pyrolysis Technology,” Waste Management, Vol. 31, 2011, pp. 2142-2149. doi:10.1016/j.wasman.2011.04.017
- U.S.EPA: Municipal Solid Waste Generation, Recycling, and Disposal in the United States Tables and Figures for 2010, http://www.epa.gov/osw/nonhaz/municipal/pubs/ 2010_MSW_Tables_and_Figures_508.pdf,Accessed January 2013.
- E. A. Williams and P. T. Williams, “Analysis of Products Derived from the Fast Pyrolysis of Plastic Waste,” Journal of Analytical and Applied Pyrolysis, Vol. 40-41, 1997, pp. 347-363. doi:10.1016/S0165-2370(97)00048-X
- Miltner, W. Wukovits, T. Pröll and A. Friedl, “Renewable Hydrogen Production: A Technical Evaluation Based on Process Simulation,” Journal of Cleaner Production, Vol. 18, 2010, pp. 551-562. doi:10.1016/j.jclepro.2010.05.024