The Maximum Power Tracking Method and Reactive Compensation Simulation Research Based on DIgSILENT
- 1 College of Electrical and Electronic Engineering, North China Electric Power University, Beijing, China
- 2 College of Electrical and Electronic Engineering, North China Electric Power University, Beijing, China
Abstract
This paper studies about the mechanical part of wind turbine and wind generator operation stability.1) It makes a comparative study of two control methods for maximum power tracking: curve fitting method and hill climbing algorithm, sets up improved control modules in DIgSLIENT and makes comparison research, thus gets the conclusion that the improved control modules of hill climbing algorithm has good effect on MPPT, and it is more desirable in the condition of steady wind. 2) This paper sets up SVC and STATCOM models and improved control modules in DIgSLIENT, which are connected to wind power system, verifying the validity of SVC and STATCOM models, and verifying its influence on wind power plant and system. The results of the study show that STATCOM is more helpful in voltage recovery when large disturbance of three-phase short-circuit happened in wind power grid, reactive compensation is more effective.
- S. Heier, “Grid Integration of Wind Energy Conversion System,” John Wiley & Sons Ltd, Chichester, 1998.
- Y. D. Song, B. Dhinakaran and X. Y. Bao, “Variable Speed Control of Wind Turbines Using Nonlinear and Adaptive Algorithms,” Journal of Wind Engineering and Industrial Aerodynamics, Vol. 85, No. 3, 2000, pp. 293-308. doi:10.1016/S0167-6105(99)00131-2
- C. Hamon, “Doubly-fed Induction Generator Modeling and Control in DIgSILENT Power Factory,” Master’s Thesis, KTH School of Electrical Engineering, 2010.
- Q. H. Liu, “The Investigation of Operation and Control for a Variable-Speed Constant-Frequency Wind Power GenerationSystem,” Ph.D. Thesis, Zhejiang University, 2005.
- Q. Wang and L. C. Chang, “An Intelligent Maximum Power Extraction Algorithm for Inverter-based Variable Speed Wind Trubine Systems,” IEEE Transactions on Energy Conversion, Vol. 19, No. 5, 2004, pp. 1242-1249.
- Y. N. Chi, “Studies on the Stability Issues about Large Scale Wind Farm Grid Integration,” Ph.D. Thesis, China Electric Power Research Institute, 2006.
- R. Esmaili, L. Xu and D. K. Nichols, “A New Control Method of Permanent Magnet Generator for Maximum Power Tracking in Wind Turbine Application,” IEEE Power Engineering Society General Meeting, Vol. 8, No. 3, 2002, pp. 26-33.
- X. L. Zhu and L. Wu, “Research on MPPT Control Method for Doubly-fed Wind Power Generation Systems,” Power Electronics, Vol. 46, No. 1, 2012, pp. 1-3.
- AN. M. Noroozi, A. N. Petersson and B. Thorvaldson, “Benefits of SVC and STATCOM for electric utility application,” Proceedings of IEEE/PES Transmission and Distribution Conference and Exposition, 2003.
- Y. N. Chi, H. L. Guan, W. S. Wang and H. Z. Dai, “Enhancement of Transient Voltage Stability of Induction Generator Based Wind Farm by SVC and Pitch Control,” Automation of Electric Power System, Vol. 31, No. 3, 2007, pp. 95-100.
- W. Zhou, “The Var Compensator Research of Wind-Power Plant Based on SVC and STATCOM,” Master’s Thesis, Xinjiang University, 2008.