Research ArticleOpen AccessGoogle Scholar indexed
The Condenser Performance Test and Thermal Performance Analysis of Variable Conditions in TQNPC
The Mal Power Technology Center, Suzhou Nuclear Power Research Institute, Suzhou, China
The Mal Power Technology Center, Suzhou Nuclear Power Research Institute, Suzhou, China
The Mal Power Technology Center, Suzhou Nuclear Power Research Institute, Suzhou, China
The Mal Power Technology Center, Suzhou Nuclear Power Research Institute, Suzhou, China
The Mal Power Technology Center, Suzhou Nuclear Power Research Institute, Suzhou, China
State Key Laboratory of Coal Combustion, Huazhong University of Science and Technology, Wuhan, China
State Key Laboratory of Coal Combustion, Huazhong University of Science and Technology, Wuhan, China
- 1 The Mal Power Technology Center, Suzhou Nuclear Power Research Institute, Suzhou, China
- 2 The Mal Power Technology Center, Suzhou Nuclear Power Research Institute, Suzhou, China
- 3 The Mal Power Technology Center, Suzhou Nuclear Power Research Institute, Suzhou, China
- 4 The Mal Power Technology Center, Suzhou Nuclear Power Research Institute, Suzhou, China
- 5 The Mal Power Technology Center, Suzhou Nuclear Power Research Institute, Suzhou, China
- 6 State Key Laboratory of Coal Combustion, Huazhong University of Science and Technology, Wuhan, China
- 7 State Key Laboratory of Coal Combustion, Huazhong University of Science and Technology, Wuhan, China
Energy and Power Engineering·Volume 05 (2013)·Pages 566–569·Published 30 June 2013·DOI10.4236/epe.2013.54B108
Copy link · social · email
Abstract
Condenser is one of the important auxiliary equipment s in nuclear power plants. The thermal efficiency of the entire unit was depended on the condenser performance. Cleanliness factor and condenser corrected pressure are the two most important evaluation indexes. The definition and derivation of these two evaluation indexes were elaborated and clarified in this paper. And the condenser performance at variable conditions was analyzed. The seawater temperature, pipe plugging rate and seawater volume rate effect on unit output was calculated. The calculation method was simple, which can provide reference guidance for similar power plant.
KeywordsCondenserPerformance TestVariable ConditionTQNPC
- The People’s Republic of China National Development and Reform Commission. “DL/T1078-2007 Performance Test Code on Steam Surface Condensers operation,” Beijing, 2007.
- The American Society of Mechanical Engineers, “ASME PTC12.2 1998, Performance Test Code on Steam Surface Condensers,” New York.1998.
- H. H. Hu, X. P. Wang and Y. Yang, “Test and Correction Method of Condenser Performance in Large Generating Unit,” Power Station Power Station Auxiliaries, No. 12, 2004, pp. 13-17
- Heat Exchange Institute, “Standards for Steam Surface Condensers,” 9th Edition.Ohio.1995.
- The People’s Republic of China National Development and Reform Commission, “DL/T932-2005 Guide of Operation and Maintenance for the Condenser and Vacuum System of Power Plant,” Beijing, 2005.
- D. M. Xu, Y. Ke and S. Y. Wang Shiyong, “The General Calculation Method and Its Application of Turbine Back Pressure,” Thermal Power Engineering, Vol. 25, No. 6, 2010, pp. 605-684
- Q. S. Zhao, D. B. Deng and Y. Liu, “The Accurate Thermal Performance History Files of Wet Steam Turbine in Nuclear Power Plant,” 2012 Asia-Pacific Power and Energy Engineering Conference, shanghai, 28-31 March 2012.