Edge Detection of Composite Insulators Hydrophobic Image Based on Improved Canny Operator
- 1 Hebei Provincial Key Laboratory of Power Transmission Equipment Security Defense, North China Electric Power University, Baoding, China
- 2 Hebei Provincial Key Laboratory of Power Transmission Equipment Security Defense, North China Electric Power University, Baoding, China
- 3 Hebei Provincial Key Laboratory of Power Transmission Equipment Security Defense, North China Electric Power University, Baoding, China
- 4 Hebei Provincial Key Laboratory of Power Transmission Equipment Security Defense, North China Electric Power University, Baoding, China
- 5 Hebei Provincial Key Laboratory of Power Transmission Equipment Security Defense, North China Electric Power University, Baoding, China
Abstract
The detection of hydrophobicity is an important way to evaluate the performance of composite insulators, which is helpful to the safe operation of composite insulators. Image processing technology is used to judge the hydrophobicity of composite insulators, which makes detection results more accurate and overcomes the subjective drawbacks of traditional detection methods. As the traditional Canny operator requires manual intervention in selecting the variance of the Gaussian filter and the threshold , the paper presents a method of edge detection based on improved Canny operator. First, the adaptive median filter replaces the Gaussian filter, which can eliminate the impact from the variance of Gaussian filter and remove noise according to the characteristics of the image itself. Then the Ostu threshold method is used to select the best threshold automatically, which makes the edge detection be more continuous and reduce the presence of fake edges. The results show that the operator is applicable to all hydrophobic images.
- Z. C. Guan, et al, “Insulator and Power Transmission and Transformation Equipment External Insulation,” 1th Edition, Tsinghua University Press, Beijing, 2006, pp. 11-20.
- W. Song, et al,“On-line Detection Methods of Composite Insulator,” High Voltage Engineering, Vol. 3, No. 5, 2005,pp. 28-30.
- R. Barsch, H. Jahn and J. Lambrecht, “Methods for Polymeric Insulating Materials for Outdoor HV Insulation,” IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 6, No. 5, 1999, pp. 668-675. doi:10.1109/94.798123
- S. W. Wang, “Study on Insulation Characteristics of Organic Contamination Area Outside,” Ph. D. Thesis, Tsinghua University, Beijing, 2001.
- Z. C. Wang, X. D. Liu and L. X. Xue, “Improved Method of Canny Operator Edge Detection,” Computer engineering and Application, Vol. 46, No. 34, 2010, pp. 202-205
- N. C. Gallagher and G. L. Wise, “A Theoretical Analysis of Properties of the Median Filters,” IEEE Transactions on Acoustics Speech, Signal Processing, Vol. 29, No.1, 1981, pp. 1136-1141. doi:10.1109/TASSP.1981.1163708
- R. C. Gonzalez and R. E. Woods, “Digital Image Processing,” 2th Edition, Prentice-Hall, New Jersey, 2001, pp. 103-113.
- S. J. Alex, “Adaptive Image Contrast Enhancement using Generalizations of Histogram Equalization,” IEEE Transactions on Image Processing, Vol. 9, No .5, 2000, pp. 889-896.