Power System Reactive Power Optimization Based on Fuzzy Formulation and Interior Point Filter Algorithm
- 1 China Electric Power Research Institute, Beijing, China
- 2 Gansu Electric Power Corporation, Lanzhou, China
- 3 China Electric Power Research Institute, Beijing, China
- 4 China Electric Power Research Institute, Beijing, China
- 5 China Electric Power Research Institute, Beijing, China
- 6 Northeast China Grid Company, Shenyang, China
Abstract
Considering the soft constraint characteristics of voltage constraints, the Interior-Point Filter Algorithm is applied to solve the formulation of fuzzy model for the power system reactive power optimization with a large number of equality and inequality constraints. Based on the primal-dual interior-point algorithm, the algorithm maintains an updating “filter” at each iteration in order to decide whether to admit correction of iteration point which can avoid effectively oscillation due to the conflict between the decrease of objective function and the satisfaction of constraints and ensure the global convergence. Moreover, the “filter” improves computational efficiency because it filters the unnecessary iteration points. The calculation results of a practical power system indicate that the algorithm can effectively deal with the large number of inequality constraints of the fuzzy model of reactive power optimization and satisfy the requirement of online calculation which realizes to decrease the network loss and maintain specified margins of voltage.
- H. Yuan, G. G. Xu and J. Y. Zhou, “A Reactive Power/voltage Optimization Based on Fuzzy Linear Programming,” Power System Technology, Vol. 27 , No. 12, 2003, pp. 42-45.
- F. R. Tu and X. R. Wang, “Fuzzy Modeling for Power System Reactive Power Optimization,” Power System Protection and Control, Vol. 38, No. 13, 2010, pp. 46-49.
- Y. N. Li, L. Z. Zhang and Y. H. Yang, “Reactive Power Optimization Under Voltage Constraints Margin,” Proceedings of the CSEE, Vol. 21, No. 9, 2001, pp. 1-4.
- K. Tomsovic, “A Fuzzy Linear Programming Approach to the Reactive Power/Voltage Control Problem,” IEEE Trans on Power Systems, 1992, Vol. 7, No. 1, pp. 287-293. doi:10.1109/59.141716
- M. B. Liu, Y. Cheng and S. H. Lin, “Comparative Studies of Interior-point Linear and Nonlinear Programming Algorithms for Reactive Power Optimization,” Automation of Electric Power Systems, Vol. 26, No. 1, 2002, pp. 22-26.
- M. B. Liu, S. K. Tso, Y. Cheng, “An Extended Nonlinear Primal-dual Interior-point Algorithm for Reactive-power Optimization of Large-scale Power Systems with Discrete Control Variables,” IEEE Trans on Power Systems, Vol. 17, No. 4, 2002, pp. 982-991. doi:10.1109/TPWRS.2002.804922
- J. D. Xu, X. Q. Ding, Z. C. Qin Zhencheng, et a1., “A Nonlinear Predictor-Corrector Interior Point Method for Reactive Power Optimization in Power System,” Power System Technology, Vol. 29, No. 9, 2005, pp. 36-40.
- K. Pan, X. S. Han and X. X. Meng, Solution Principles Study of Nonlinear Correction Equations in Primal-dual Interior Point Method for Reactive Power Optimization,” Power System Technology, Vol. 30, No. 19, 2006, pp. 59-65.
- U. Michael, S. Ulbrich, L. N. Vicente, A Globally Convergent Primal-dual Interior-point Filter Method for Non-linear Programming,” Mathematical Programming, Vol. 100, No. 2, 2004, pp. 379-410. doi:1007/s10107-003-0477-4
- W. Andreas and L. T. Bieglery, “Line Search Filter Methods for Nonlinear Programming: Motivation and Global Convergence,” Yorktown Heights, USA: IBM T. J. Watson Research Center, 2001.
- S. Yang, J. Y. Zhou, Q. Li, et a1., “An Interior-point Reactive Power Optimization Based on Filter Set,” Power System Protection and Control, 2011, Vol. 39, No. 18, pp. 14-19.
- Y. Y. Sun, G. Y. He and S. W. Mei, “A New Optimal Power Flow Algorithm Based on Filter Interior Point Method,” Advanced Technology of Electrical Engineering and Energy, Vol. 26, No. 2, 2007, pp. 29-33.