Research ArticleOpen AccessGoogle Scholar indexed
Analysis of Output Characteristics of Buck Converter
Engineering Institute of Defence, PLA University of Science&Technology, Nanjing, China
Engineering Institute of Defence, PLA University of Science&Technology, Nanjing, China
Engineering Institute of Defence, PLA University of Science&Technology, Nanjing, China
Engineering Institute of Defence, PLA University of Science&Technology, Nanjing, China
- 1 Engineering Institute of Defence, PLA University of Science&Technology, Nanjing, China
- 2 Engineering Institute of Defence, PLA University of Science&Technology, Nanjing, China
- 3 Engineering Institute of Defence, PLA University of Science&Technology, Nanjing, China
- 4 Engineering Institute of Defence, PLA University of Science&Technology, Nanjing, China
Energy and Power Engineering·Volume 05 (2013)·Pages 1069–1071·Published 30 June 2013·DOI10.4236/epe.2013.54B203
Copy link · social · email
Abstract
This Article i ntroduced the concept, topology and function of voltage type Buck converter, buil t a small signal model, analysis the negative impedance character of converter, then simulat ed a Buck-type DC/ DC through MATLAB, observed the dynamic response of converter to pulse-type power load, verified the small-signal theoretical by simulation, lay the foundation for anal yz ing DC system stability.
KeywordsSmall-signal ModelNput ImpedanceBuck ConverterDC System
- H. Sira-Ramirez, “Slind Motions in Bilinear Swithed Networks,” IEEE Transactions on Circuits Systems, Vol. 34, No. 8, 1987, pp. 919-933.
- X. Feng, et al.,“Individual Load Impedance Specification for a Stable DC Distributed Power System,” IEEE APEC Record,1999.
- J. Sun and H. Grotstollen, “Symbolic Analysis of Switching Power Converters Based on a General Averaging Method,” Power Electronics Specialists Conference, 27th Annual IEEE, Vol. 1, 23-27 June 1996, pp. 543-549
- B. Gao, G. K. Morison and K. P. Voltage, “Stability Evaluation Using Model Analysis,” IEEE Transactions on PWS, Vol. 17, No. 4, 1992, pp. 1529-1536.
- D. Czarkowki, L. R. Pjara and M. K. Kazimierczuk, “Robust Stability of State-feedback Control of PWM DC-DC Push-pull Converter,” IEEE Transactions on Industrial Electronics, Vol. 42, No. 1, 1995, pp.108-111. doi:10.1109/41.345854
- F. L. Luo and H. Ye, “Positive Output Super-lift Converters,” IEEE Transactions on Power Eletronics, Vol. 18, No. 1, 2003, pp. 105-113. doi:10.1109/TPEL.2002.807198
- F. Z. Peng, J. S. Lai and J. W. Mckeever, “A Multilevel Voltage Source Inverter with Separate DC Source for Static Var Generation,” IEEE Transactions on Industry Applications, 1996.
- T. C. Neugebauer, J. W. Phinney and D. J. Perreault, “Filters and Components with Inductance Cancellation,” IEEE Transactions on Industry Applications, Vol. 40, No. 2, 2004, pp. 483-491. doi:10.1109/TIA.2004.824487
- Z. H. Zhao and W. M. Ma, “Coupling Model and Impedance Calculation of the Steel Ground Loops with Proximity Effect,” IEEE Transactions on Electromagnetic Compatibility, Vol. 48, No. 3, 2006, pp. 522-529. doi:10.1109/TEMC.2006.877780
- E. Porter, S. Ang, K. Burgers, et al.,“Miniaturizing Power Electronics using Multi-chip Module Technology,” Proceedings of International Conference on Multichip Modules,1997.
- S. Wang, F. C. Lee and W. G. Odendaal, “Characterization and Parasitic Extraction of EMI Filters Using ScatteringParameters,” IEEE Transactions on Power Electronics,Vol. 20, No. 2, 2005, pp. 502-510.doi:10.1109/TPEL.2004.842949
- C. Batlle, E. Fossas and G. Olivar, “Stabilization of Periodic Orbits in Variable Structure Systems Application to DC/DC Power Converters,” MAU-UPC-01/96,1996.