Amalgamated-signal Cymometer Based on TMS320F28335
- 1 College of Electrical Engineering, Zhejiang University, Hangzhou ,China
- 2 College of Electrical Engineering, Zhejiang University, Hangzhou ,China
- 3 College of Electrical Engineering, Zhejiang University, Hangzhou ,China
Abstract
In our design, an amalgamated-signal cymometer is developed with a TMS 320F 28335 DSP chip ---- we use its on-chip 12-bit 16-channel AD to conduct a novel dual-sequencer synchronize sampling and averaged to improve the accuracy. Considering the algorithm, we use TI's C28x_FPU_Lib to conduct a FFT with sampled results and correct spectrum with Time-Shift Phase Difference Correcting Spectrum Method based on all-phase spectral analysis. Namely, we design a sampling-frequency self-adaption algorithm which makes operation keep on without outside-hardware command. Actually, the test result shows that our design's frequency resolution ratio is up to 0.4%, and the maximum frequency’s D-value between main and minor signal is up to 29.99 kHz.
- K. J. Xu, “Theory and Application of TMS320X281X DSP,” Beijing University of Aeronautics and Astronautics Press, 2006.
- K. Ding, “Discrete Spectrum Correction Theory and Technology,” Science Press, 2007.
- RIFEDG, VINCENTGA. Use of the discrete fourier transform in the measurement of levels and tones[ J]. Bell Syst. Tech. J. , 1970, 49( 2): 197- 228.
- Z. H. Wang, “Digital Signal All Phase Spectrum Analysis and Filtering Technology,” Electronic Industry Press, 2009.
- “TMS320F28335 Data Manual,” Texas Instruments.
- G. Z. Zhao, “Signal Analysis and Processing,” Mechanical Industry Press, 2005.
- Z. Z. Li, “Digital Signal Processing and Application with MATLAB,” Tsinghua University Press, 2008.
- “Assembly Good Paper of C2000 Grand Prix of TI C2000 Senior Embedded Controlled in 2008,” Electronic Industry Press, 2008.