Towards Harmonization IEC61850 and Intelligent Agents: Characteristic Analysis of Service Tracking
- 1 Xiangtan University, Xiangtan, Hunan, China
- 2 Xiangtan University, Xiangtan, Hunan, China
- 3 Xiangtan University, Xiangtan, Hunan, China
Abstract
IEC61850 is the most promising standard for design of power utility communication networks and automation systems. On the other hand multi-agent systems are attracting growing interest for different applications of power engineering. This paper presents the possibility that IEC61850 could be applied to build intelligent agents for power engineering applications. The paper investigates the correlation between IEC61850 and multi-agents and presents IEC61850 service tracking as a scenario. First, briefly introduces reporting and service tracking; then, investigates agents, intelligent agents and the characteristics of intelligent agents; last, analyzes the characteristics of service tracking and compares it with intelligent agents. And analysis shows that IEC61850 could be applied to build intelligent agents, which represents a significant step forward for MAS to apply in power engineering.
- D. W. Wang, Y. L. Zhu, J. Di and X. M. Zhai, “A Method for Electric Power Equipment Remote Control Based on IEC 61850,” Automation of Electric Power Systems, Vol. 33, No. 5, 2009, pp. 50-54.
- M. García-Gracia, S. Borroy, L. Giménez de Urtasun and M. P. Comech, “Novel Protection Scheme Based on IEC61850,” Electric Power Systems Research, Vol. 81, No. 12, 2011, pp. 2178-2187. doi:10.1016/j.epsr.2011.07.017
- Y. Ma, J. Y. Zheng, J. Mei and Z. Zhang, “Information Modeling and Communication of SF6 Circuit Breaker On-line Monitoring System Based on IEC61850,” Electric Power Automation Equipment, Vol. 30, No. 2, 2010, pp. 131-134.
- D. B. Liu, X. P. Gu and H. P. Li, “Complete Analytic Modeling for Power System Fault Diagnosis Based on IEC61850,” Automation of Electric Power Systems, Vol. 36, No. 10, 2012, pp. 94-100.
- E. M. Davidson, S. D. J. McArthur, J. R. McDonald, T. Cumming and I. Watt, “Applying Multi-agent System technology in practice: Automated Management and Analysis of SCADA and Digital Fault Recorder Data,” IEEE Transactions on Power Systems, Vol. 21, No. 2, 2006, pp. 559-567. doi:10.1109/TPWRS.2006.873109
- I. S. Baxevanos and D. P. Labridis, “Implementing Multi Agent Systems Technology for Power Distribution Network Control and Protection Management,” IEEE Transactions on Power Del., Vol. 22, No. 1, 2007, pp. 433-443. doi:10.1109/TPWRD.2006.877085
- C.-X. Dou, S.-J. Jin, G.-T. Jiang and Z.-Q. Bo, “Multi-Agent Based Control Framework for Microgrids,” in 2009 Asia-Pacific Power and Energy Engineering Conference, Wuhan, China, 2009, pp. 1-4.
- T. Li, Z. Xiao, M. Huang, J. Yu and J. Hu, “Control System Simulation of Microgrid Based on IP and Multi-Agent,” in 2010 International Conference on Information, Networking and Automation (ICINA), Kunming, China, 2010, pp. 235 -239. doi:10.1109/ICISA.2010.5480311
- I. Zabet and M. Montazeri, “Implementing Cooperative Agent-based Protection and Outage Management System for Power Distribution Network Control,” The 4th International Power Engineering and Optimization Conf. (PEOCO2010), Shah Alam, Selangor, MALAYSIA: 23-24 June 2010, pp. 318-324.
- Z. Y. Gao, J. G. Yao, S. C. Yang, et al., “Survey of Coordination Scheme between CIM and IEC61850 Model,” Automation of Electric Power Systems, Vol. 35, No. 16, 2011, pp. 9-14.
- V. Vyatkin, G. Zhabelova, N. Higgins, K. Schwarz and N. K. C. Nair, “Towards Intelligent Smart Grid Devices with IEC 61850 Interoperability and IEC 61499 Open Control Architecture,”