Research ArticleOpen AccessGoogle Scholar indexed
Review of Modeling Methods of Distributed Energy Supply System Connected to the Grid
School of Electric Power, South China University of Technology, Guangzhou, China
School of Electric Power, South China University of Technology, Guangzhou, China
- 1 School of Electric Power, South China University of Technology, Guangzhou, China
- 2 School of Electric Power, South China University of Technology, Guangzhou, China
Energy and Power Engineering·Volume 05 (2013)·Pages 1317–1323·Published 30 June 2013·DOI10.4236/epe.2013.54B250
Copy link · social · email
Abstract
At present, the development of distribution network can’t meet the requirements of rapid economic development. The traditional single energy supply is difficult to meet the request, and distributed energy supply has a lot of advantages compared to it, particularly it's close to the end users, and they have been developed well and applied widely in recent years. This paper summarizes the features and current development of the distributed energy supply, and mainly describes the grid-connection model of distributed energy supply. Base on the mathematic grid-connection model of distributed power sources with different generation principles as well as that energy storage, the treatment of these models in distribution network power flow analysis is also presented.
KeywordsModelingDistributed Energy SupplyGrid-connection
- Mukesh Nagpal, Frank Plumtre, Richard Fulton, T. G. Martinich, “Dispersed Generation Interconnection-Utility Perspective,” IEEE Transactions on Industry Applications, Vol.42, No.3, 2006, doi:10.1109/TIA.2006.872954
- T. E. Kim, J. E. Kim, “A Method for Determining the Introduction limit of distribution generation system in distribution system,” 2001 IEEE, 2001.
- A. Losi, M. Russo, “An Object Oriented Approach to Load Flow in Distribution Systems,” in Proc IEEE PES Summer Meeting, Vol. 4, Seattle, WA, July2000, pp. 23322-2337.
- Y. Zhu, K. Tomsovic, “Adaptive Power Flow Method for Distribution System with Dispersed Generation,” IEEE Transactions on Power Delivery, Vol.17, No.3, 2002, pp.822-827. doi:10.1109/TPWRD.2002.1022810
- C. S. Wang, H. F. Zheng, Y. H. Xie, K. Chen, “Probabilistic Power Flow Containing Distributed Generation in Distribution System,” Automation of Electric Power Systems, Vol.29, No.24, 2005, pp.39-44.
- A. E. Feijoo, Jose Cidras, “Modeling of Wind Farm in the Load Flow Analysis,”IEEE transactions on power system, Vol.15, No.1, 2000, pp. 110-115. doi:10.1109/59.852108
- C. S. Wang, Maliki Guindo, “Three-phase Unbalanced Radial Distribution Power Flow Analysis with Wind Farm Considered,” Automation of Electric Power System, Vol.30, No.16, 2006, pp.21-26.
- Z. Xiang, W. Jiang, D. Xie, “Research on Stable Operation of Grid-connected Wind Farms,” East China Electric Power, Vol.35, No.3, 2007, pp.36-40.
- H. Y. Chen, J. F. Chen, X. Z. Duan, “Study on Power Flow Calculation of Distribution System with DGs,” Automation of Electric Power Systems, Vol. 30, No.1, 2006, pp.35-40.
- S. X. Wang, X. Y. Jiang, C. S. Wang, “Distribution Power Flow Calculation with Wind Turbines,” China International Conference on Electricity, 2006.
- S. Conti, S. Raiti “Probabilistic Load Flow Using Monte Carlo Techniques for Distribution Networks with Photovoltaic Generators,” Sol. Energy, 2007.
- O. Wasynczuk, “Modeling and Dynamic Performance of a Line-commutated Photovoltaic Inverter System,”IEEE Transactions on Power Conversion, Vol.4, No.3, 1989, pp.337-343.
- L. Zhang, A. Al-Amoudi, Y. F. Bai, “Real-time Maximum Power Point Tracking for Grid-Connected Photovoltaic Systems,” Power Electronics and Variable Speed Drives, 2000, pp.124-129.
- D. J. Zhou, Z. M. Zhao, L. B. Wu, “Analysis Characteristics of Photovoltaic Arrays Using Simulation,” Journal of Tsinghua University (Natural Science), Vol.47, No.7, 2007, pp.1109-1112.