Experiment and Analysis on Flue Gas Low Temperature Corrosion Monitoring
- 1 Electrical and Mechanical practice center, Beijing Information Science & Technology University, Beijing, China
- 2 School of Energy Power and Mechanical Engineering, North China Electric Power University, Beijing, China
- 3 Electrical and Mechanical practice center, Beijing Information Science & Technology University, Beijing, China
- 4 Electrical and Mechanical practice center, Beijing Information Science & Technology University, Beijing, China
- 5 Electrical and Mechanical practice center, Beijing Information Science & Technology University, Beijing, China
- 6 Electrical and Mechanical practice center, Beijing Information Science & Technology University, Beijing, China
- 7 2School of Energy Power and Mechanical Engineering, North China Electric Power University, Beijing, China 3Key Laboratory of Low-grade Energy Utilization Technologies and Systems of Ministry of Education of China, Chongqing University, Chongqing, China
Abstract
Thermal loss of exhaust flue gas accounts for the largest proportion of the total boiler thermal loss. Nowadays in China, the exhaust gas temperature in many thermal power plants is much higher than the designed value, thus, the recycle and reuse of the waste heat of tail flue gas is necessary. However, lower exhaust gas temperature will aggravate low temperature corrosion of the tail heating surface, which also causes huge economic losses. In order to solve this problem, this paper designs a monitoring experiment platform of flue gas low temperature corrosion, which can measure the corrosion condition of different materials by different flue gas compositions and temperature corrosion speeds. Besides, effects of low temperature corrosion factors are analyzed to find the best exhaust gas temperature and the surface material of tail heating surface.
- The Central People's Government of the People's Republic of China, Outline of the 12th Five-Year Plan for National Economic and Social Development, Electric Systems Analysis, 2011.3.21.
- A. L. Ma, “Analysis and Preventive Measures of Boiler Tail-heating Surface Low-temperature Corrosion,” Science and Technology Innovation Herald, Vol. 15，2010, pp. 73-74.
- X. G. Wang, B. Zhao and M. X. Wang, “Power Plant Boiler Air Preheater Low Temperature Corrosion and Prevention Measures,” Metallurgical Energy, Vol. 24, No. 3, 2005, pp. 57-59.
- Q. Le, L. Zhang and N. Yang, “Economic Benefit Analysis of Thermal Power Plants Installed Low-pressure Economizer,” Northeast Dianli University Journal, Vol. 26, No. 1, 2006, pp. 22-26.
- S. Y. Liu, “Account on Temperature and Effect of Corrosion on Air Preheater Cold END of Boiler Gas Acid Dew Point,” BoilerMaking, Vol. 2, 2009, pp. 18-30.