Some Design and Simulation of Sliding Mode Variable Structure Control for Hopf Bifurcation in Power Systems
- 1
- 2
- 3
Abstract
In power systems, the Hopf bifurcation (HB) can occur before the saddle-node bifurcation (SNB) and be-comes one of main reasons of voltage instability and collapse, so the bifurcation control for HB has impor-tant significance in improving power system voltage stability. In this paper, the numerical bifurcation analy-sis software MATCONT was used to study bifurcation behavior of a single-machine dynamic-load (SMDL) system with SVC, and the simulation analysis results show that a unstable Hopf bifurcation (UHB) point oc-curring before SNB point and engendering potential harm to voltage stability. To delay or eliminate the UHB phenomenon and enhance voltage stability of the SMDL system with SVC, we designed a sliding mode variable structure controller. The switching function and control variables of the controller are clearly de-scribed and the derivations are directly provided in detail in this paper. The MATLAB simulation results prove that the designed controller can eliminate the UHB point effectively and ensure safe and stable opera-tion of the system.
- Y. Wang, H. Chen, R. Zou, “A Nonlinear Controller Design for SVC to Improve Power System Voltage Stability,” Electrical Power and Energy Systems, Vol. 22, No. 7, October 2000, pp. 463-70. doi:10.1016/S0142-0615 (00)00023-5
- Z. J. Jing, D. S. Xu, Y. Chang, and L. L. Chen, “Bifurcations, Chaos, and System Collapse in a Three Node Power System,” Electrical Power and Energy Systems, Vol. 25, No. 6, July 2003, pp. 443-61. doi:10.1016/S014 2-0615(02)00130-8
- S. S. Mohamed, A. H. Munther, H. A. Eyad and E. Abdel-Aty, “Delaying Instability and Voltage Collapse in Power System Using SVCs with Washout Filter-Aided Feedback,” Proceedings of 2005 American Control Conference, Portland, 2005, pp. 4357-4362.
- S. F. Liu, J. F. Gao and P. Li, “Multi-Parameter Bifurcation Analysis of a Typical Power System with the Walve Aggregated Load Model,” Relay, Vol. 32, No. 19, 2004, pp. 13-17.
- Z. W. Peng, G. G. Hu and Z. X. Han, “Power System Voltage Stability Analysis Based on Bifurcation Theory,” China Electric Power Press, Beijing, 2005.
- Y. M. Hu, “Variable Structure Control Theory and Application,” Science Press, Beijing, 2003.
- W. B. Gao, “Variable Structure Control Theory and Design Methods,” Science Press, Beijing, 1996.
- C. A. Caňizares, “On Bifurcation, Voltage Collapse and Load Modeling,” IEEE Transactions on Power Systems, Vol. 10, No. 1, 1995, pp. 512-522. doi:10.1109/59.37397 8
- C. A. Caňizares, “Calculating Optimal System Parameters to Maximize the Distance to Saddle-Node Bifurcations,” IEEE Transactions on Circuits and Systems-I, Vol. 45, No. 3, 1998, pp. 225-237. doi:10.1109/81.662696
- W. Gu, F. Milano, P. Jiang and G. Q. Tang, “Hopf Bifurcations Induced by SVC Controllers: A Didactic Example,” Electric Power Systems Research, Vol. 77, No. 3-4, pp. 234-240, 2007. doi:10.1016/j.epsr.2006.03.001
- S. Li and Z. H. Su, “Static State Feedback Control for Saddle-Node Bifurcation in a Simple Power System,” Proceedings of the 2nd Conference on Power Electronics and Intelligent Transportation System, Shenzhen, Vol. 1, 2009, pp. 158-160.
- J. W. Du, B. Wang and W. Cai, “Study on Nonlinear Grey Sliding Mode Controller for Static Var Compensator,” Electrotechnical Application, Vol. 26, No. 7, pp. 50- 53, 2007.
- Z. J. Kang and F. Y. Meng, “Nonlinear Variable Structure SVC Control Based on Extended States Observer,” Relay, Vol. 35, No. 22, 2007, pp. 10-13.