Transmission and Consumption of Air Power in Pneumatic System
- 1 Department of Mechano-Micro Engineering, Tokyo Institute of Technology, Kanagawa, Japan
- 2 Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology, Kanagawa, Japan
- 3 Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology, Kanagawa, Japan
- 4 School of Automation Science and Electrical Engineering, Beihang University, Beijing, China
Abstract
In recent 20 years, energy saving has been done in many projects. However, in pneumatic system, it is not easy to determine or measure the air power flow because of the compressibility of pneumatic system. In this paper, we used air power meter (APM) to measure the energy consumption of flow in pneumatic cylinder actuator system. Meter-in circuit and meter-out circuit of speed control system are used in this research. The model of cylinder system is based on four equations: state equation of air, energy equation, motion equation and flow equation. The model estimates the pressure change in charge and discharge side of cylinder, and also the displacement and velocity of the piston. Furthermore, energy consumption could theoretically be calculated when the change of air state is regarded as isothermal change. Lastly, some data of these two circuits are shown, and the consumption of energy is discussed.
- Shi, Y.X., Li, X.N. and Teng, Y. (2005) Research on Pneumatic Cylinder’s Exhausted-Air Reclaiming Control Devices. Proceedings of the JFPS International Symposium on Fluid Power, Tsukuba, 7-10 November 2005, 558-563.
- Cai, M.L., Fujita, T. and Kagawa, T. (2001) Energy Consumption and Assessment of Pneumatic Actuating Systems. Journal of The Japan Fluid Power System Society, 32, 118-123.
- Cai, M.L., Fujita, T. and Kagawa, T. (2002) Distribution of Air Available Energy in Pneumatic Cylinder Actuation. Journal of the Japan Fluid Power System Society, 33, 91-98. http://dx.doi.org/10.5739/jfps.33.91
- Cai, M.L. and Kagawa, T. (2007) Energy Consumption Assessment and Energy Loss Analysis in Pneumatic System. Chinese Journal of Mechanical Engineering, 43, 69-74. http://dx.doi.org/10.3901/JME.2007.09.069
- Li, K.W. (1995) Applied Thermodynamics: Availability Method and Energy Conversion. Taylor & Francis, London.
- Cai, M.L., Kawashima, K. and Kagawa, T. (2006) Power Assessment of Flowing Compressed Air. Journal of Fluids Engineering, Transactions of the ASME, 128, 402-405.