Research ArticleOpen AccessGoogle Scholar indexed
Polymer Foam Flow in Porous Media under Different Injection Modes
Key Laboratory of Enhanced Oil and Gas Recovery of Ministry of Education, Northeast Petroleum University, Daqing, China
Key Laboratory of Enhanced Oil and Gas Recovery of Ministry of Education, Northeast Petroleum University, Daqing, China
Key Laboratory of Enhanced Oil and Gas Recovery of Ministry of Education, Northeast Petroleum University, Daqing, China
- 1 Key Laboratory of Enhanced Oil and Gas Recovery of Ministry of Education, Northeast Petroleum University, Daqing, China
- 2 Key Laboratory of Enhanced Oil and Gas Recovery of Ministry of Education, Northeast Petroleum University, Daqing, China
- 3 Key Laboratory of Enhanced Oil and Gas Recovery of Ministry of Education, Northeast Petroleum University, Daqing, China
Energy and Power Engineering·Volume 07 (2015)·Pages 365–374·Published 7 August 2015·DOI10.4236/epe.2015.78034
Copy link · social · email
Abstract
The mathematical models of the flow of polymer foam in porous media under three injection modes are established and the relevant numerical calculation methods are given. The profiles of the liquid phase saturation, the pressure drop and the number density of the flowing HPAM foam in artificial sandstone cores with the dimensionless distance under three injection modes are numerically calculated and analyzed. The results show that, compared with the injection mode 2 and 3, HPAM foam flows in a piston-like fashion in the artificial sandstone core under the injection mode 1 and produces the biggest pressure drop. Obviously, the flood efficiency is the highest under the injection mode 1.
KeywordsInjection ModePolymer FoamPorous MediaMathematical ModelNumerical Calculation
- Shan, D. and Rossen, W.R. (2002) Optimal Injection Strategies for Foam IOR. SPE Journal, 9, 1-17.
- Steven, J.E., Harpole, K.J., Zornes, D.R. and Martin, F.D. (1992) CO2 Foam Field Verification Pilot Test at EVGSAU: Phase II-Foam Injection Design and Operation Plan. SPE Annual Technical Conference and Exhibition, Washington, DC, 4-7 October 1992, 115-128.
- Hou,Q.F., Zhu, Y.Y., Luo, Y.S. and Weng, R. (2012) Studies on Foam Flooding EOR Technique for Daqing Reservoirs after Polymer Flooding. Proceedings of the SPE Improved Oil Recovery Symposium, Tulsa, 14-18 April 2012, 1-11. http//dx.doi.org/10.2118/151955-ms
- Li, Z.Q., Zhou, G.H. and Zhou, Z.M. (2006) The Feasibility Studies of Polymer Foam Flooding in Gudao Oilfield. Proceedings of the SPE Asia Pacific Oil & Gas Conference and Exhibition, Adelaide, 11-13 September, 1-8. http//dx.doi.org/10.2118/101189-ms
- Harsenhorst, R.M., Dharma, A.S., Andrianov, A. and Rossen, W.R. (2013) Extension of a Simple Model for Vertical Sweep in Foam SAG Displacement. Proceedings of the EAGE Annual Conference & Exhibition Incorporating SPE Europec, London,10-13 June 2013, 1-11. http//dx.doi.org/10.2118/164891-ms
- Boeije, C.S. and Rossen, W.R. (2013) Fitting Foam Simulation Model Parameters to Data. Proceedings of the IOR 2013—17th European Symposium on Improved Oil Recovery, St. Petersburg, 16-18 April 2013, 1-16. http//dx.doi.org/10.3997/2214-4609.20142604
- Persoff, P., Radke, C.J., Pruess, K, Benson, S.M. and Witherspoon, P.A. (1991) A Laboratory Investigation of Foam Flow in Sandstone at Elevated Pressure. SPE Reservoir Engineering, 6, 365-372. http//dx.doi.org/10.2118/18781-PA
- Kovseck, A.R. (1994) Foam displacement in Porous Media: Experiment and Mechanistic Prediction by the Population Method. University of California at Berkely, Berkely.
- Zhao, W. (2015) Polymer Foam Transient Flow in the Porous Media. Northeast Petroleum University, Daqing.
- Bertin, H.J., Quintard, M.Y. and Castainier, L.M. (1998) Development of a Bubble-Population Correlation for Foam-Flow Modeling in Porous Media. SPE Journal, 3, 356-362. http//dx.doi.org/10.2118/52596-pa
- Garrouch, A.A. (1999) A Viscoelastic Model for Polymer Flow in Reservoir Rocks. Proceedings of the SPE Asia Pacific Oil and Gas Conference and Exhibition, Jakarta, 20-22 April 1999, 1-10. http//dx.doi.org/10.2118/54379-ms
- Falls, A.H., Musters, J.J. and Ratulowski, J. (1989) The Apparent Viscosity of Foams in Homogeneous Bead Packs. SPE Reservoir Engineering, 4, 155-164.