Double Multiple Streamtube Model and Numerical Analysis of Vertical Axis Wind Turbine
- 1
- 2
Abstract
The present paper contributes to the modeling of unsteady flow analysis of vertical axis wind turbine (VAWT). Double multiple streamtube (DSMT) model was applied for the performance prediction of straight bladed fixed pitch VAWT using NACA0018 airfoil at low wind speed. A moving mesh technique was used to investigate two-dimensional unsteady flow around the same VAWT model with NACA0018 airfoil modified to be flexible at 150 from the main blade axis of the turbine at the trailing edge located about 70 % of the blade chord length using fluent solving Reynolds average Navier-strokes equation. The results obtained from DMST model and the simulation results were then compared. The result shows that the CFD simulation with airfoil modified has shown better performance at low tip speed ratios for the modeled turbine.
- I. Paraschivoiu, “Double-Multiple Stream tube Model for Studying Vertical-Axis Wind Turbines,” Journal of Propulsion and Power, Vol. 4, No. 4, 1988, p. 370. doi:10.2514/3.23076
- G. F. Homicz, “Numerical Simulation of VAWT. Stochastic Aerodynamic Loads Produced by Atmospheric Turbulence: VAWT-SAL Code,” Technical Report SAND91-1124, Sandia National Laboratories, Albuquerque, 1991.
- J. F. Manwell, J. G. McGowan and A. L. Rogers, “Wind Energy Explained: Theory Design and Application,” John Wiley & Sons, Hoboken, 2002.
- R. Templin, “Aerodynamic Performance Theory for the NRC Vertical-Axis Wind Turbine,” National Aeronautical Establishment Laboratory Technical Report LTR-LA-160, National Research Council, Canada, 1974.
- R. Wilson and P. Lissaman, “Applied Aerodynamics of Wind Powered Machines,” Technical Report NSF-RA-N-74-113, Oregon State University, 1974.
- J. Strickland, “The Darrieus Turbine: A Performance Prediction Model Using Multiple Stream tubes,” Technical Report SAND75-041, Sandia National Laboratories, Albuquerque, 1975.
- I. Paraschivoiu, “Aerodynamic Loads and Performance of the Darrieus Rotor,” Journal of Energy, Vol. 6, No. 6, 1981, pp. 406-421. doi:10.2514/3.62621
- R. E. Sheldal and P. C. Klimas, “Aerodynamic Characteristics of Seven Airfoil Sections Through 180 Degrees Angle of Attack for Use in Aerodynamic Analysis of Vertical Axis Wind Turbines,” Sandia National Laboratories, Albuquerque, 1981.
- L. Lazauskas, “Three Pitch Control Systems for Vertical Axis Wind Turbines Compared,” Wind Engineering, Vol. 16, 1992, pp. 269-269.
- V. G. Dereng, “Fixed Geometry Self Starting Transverse Axis Wind Turbine,” US Patent No. 4264279, 1981.
- H. Beri and Y. Yao, “Effect of Camber Airfoil on Self Starting of Vertical Axis Wind Turbine,” Journal of Environmental Science and Technology, Vol. 4, No. 3, 2011, pp. 302-312. doi:10.3923/jest.2011.302.312
- J. R .Barker, “Features to Aid or Enable Self Starting of Fixed Pitch Low Solidity Vertical Axis Wind Turbines,” Journal of Wind Engineering and Industrial Aerodynamics, Vol. 15, No. 1-3, 1983, pp. 369-380. doi:10.1016/0167-6105(83)90206-4
- B. Hurley, “A Novel Vertical Axis Sail Rotor,” Proceedings of 1st Wind Energy Workshop, London, 19-20 April 1979, pp. 40-47.
- T. Wakui, Y. Tanzawa, T. Hashizume and T. Nagao, “|Hybrid Configuration of Darrieus and Savonius Rotors for Stand-Alone Wind Turbine-Generator Systems,” Electrical Engineering in Japan, Vol. 150, No. 4, 2005, pp. 13-22. doi:10.1002/eej.20071