A New Distinguish Method of Blending Coals Slagging Characteristic
- 1
Abstract
The slagging characteristic of coal effects the safe operation of boiler unit directly, the study on coal slagging is paid more and more attention by scholars of the world. Because of the complexity of coal characteristic, the blending coals slagging characteristic is more complex than single coal. The study method of blending coals characteristic is the same as the single coal method, but the simple method can’t distinguish the blending coals slagging characteristic well and truly. This paper gives the new distinguish method of blending coals slagging characteristic based on experimentation condition, it is the rate of slag and furnace refuse. The rate of slagging on furnace wall and the refuse on furnace bottom has utilized to distinguish the slagging characteristic of coal. The result shows that the rate of slag and furnace refuse method has better veracity.
- W. H. Gibb, “The Role of Calcium in the Slagging and Fouling Characteristics of Bituminous Coal,” Journal of the Institute of Energy, Vol. 59, No. 12, 1986, pp. 206-212.
- D. C. Hough, et al., “The Development of an Improved Coal Ash Viscosity Temperature Relationship for the Assessment of Slagging Propensity in Coal-fired Boilers,” Journal of the Institute of Energy, Vol. 59, No. 6, 1986, pp. 77-81.
- H. H. Schobert, R. C. Streeter, et al., “Flow Properties of Low-rank Coal Ash Slags,” Fuel, Vol. 64, No. 11, 1985, pp. 1611-1617. doi:10.1016/0016-2361(85)90380-1
- J. Ai, Y. K. Qin, Q. Y. Zhu and P. A. He, “Investigation on Assessing Slagging Index of Coal Ash at Home and Abroad,” Power System Engineering, Vol. 10, No. 2, 1994, pp. 1-18.
- M. L. Su and J. L. Zhang, “Study on Slaging Characteristic of Power Plant,” Henan Chemical Industry, Vol. 24, No. 2, 2007, pp. 23-25.
- Q. G. Fan and P. Pan, “The Correlativity on Chemistry Component Melting Temperature and Coal Ash Melting Temperature,” Boiler Technology, Vol. 38, No. 6, 2007, pp. 10-14.
- G. S. Xue, W. M. Ding and L. Cheng, “Based on Supporting Vector Machine for Boiler Slag Characteristics Evaluation,” Energy Research and Utilization, No. 6, 2008, pp. 13-15.
- Q. J. Huang, “The Product of Base/Acid and Silica/Alumina of Ash in Steal Coal—An Index to Ash Slagging Tendency,” Power Engineering, Vol. 24, No. 3, 2004, pp. 340-344.
- L. L. Baxter, “Boiler Performance with Blends of Eastern and Western Coals,” Proceedings of the 3rd EPRI Conference on the Effects of Coal Quality on Power Plants, San Diego, August 1992, pp. 54-61.
- D. I. Barnes, W. Lewittm and D. G. Richards, “The Slagging Behaviour of Blends of Power Station Coals,” Proceedings of the 3rd EPRI Conference on the Effects of Coal Quality on Power Plants, San Diego, August 1992, pp. 75-79.
- Y. H. Li, “Study on the High Efficiency and Low Pollution Combustion Characteristic of Blending Coals,” PhD Thesis, North China Electric Power University, Baoding, 2000.