Wind Tunnel at LABINTHAP (Updated)

⁴

⁵

Abstract

Flow behavior in the Thermal Engineering and Applied Hydraulics Laboratory (LABINTHAP) wind tunnel was investigated by measuring the velocity profiles, turbulence intensity and wall effects with a hot wire anemometer. Measurements were carried out under wind speeds 5, 15 and 30 m/s in planes located at 1.8, 2.6 and 3.4 m from flow inlet to the test section. The flow showed a good quality with a velocity variation less than 1%, turbulence intensity lower than 4% and the wall effects allow having an excellent work area in the test section for the velocities evaluated.

KeywordsWind TunnelCalibrationMeasurementBoundary layerHot Wire Anemometer

G. Tolentino, M. Toledo and V. Zurita, “Experimental Study of Boundary Layer on a NACA 65-010 Blade Using Some Flow Visualization Techniques. Flow Visualization and Imagine Processing of Multiphase System,” Proceeding of the 1995 ASME/JSME Fluids Engineering Division Conference, South Carolina, 13-18 August 1995.
E. R. Tolentino, V. M. Toledo, E. G. Tolentino and S. F. Sánchez, “Modificaciones al Túnel de Viento del LABINTHAP para Mediciones de Velocidad de Aire desde 5 m/s hasta 30 m/s,” Simposio de Metrología 2004, Querétaro, 25-27 Octubre 2004.
P. Bradshaw and R. C. Pankhurst, “The Design of Low Speed Wind Tunnels,” Progress in Aeronautical Sciences, Vol. 5, 1964, pp. 1-69.
R. D. Metha and P. Bradshaw, “Desing Rules for Small Low Speed Wind Tunnels,” Aeronautical Journal of the Royal Aeronautical Society, Vol. 73, 1979, pp. 443-449.
J. B. Barlow, W. H. Rae and A. Pope, “Low Speed Wind Tunnel Testing,” 3rd Edition, John Wiley and Sons, Hoboken, 1999.
T. Morel, “Design of Two-Dimensional Wind Tunnel Contractions,” Journal of Fluids Engineering, Vol. 99, No. 2, 1977, pp. 371-378. http://dx.doi.org/10.1115/1.3448764
Air Movement and Control Association (AMCA), Fan Aplication Manual, Air Systems, 1987.

Menu

Wind Tunnel at LABINTHAP (Updated)

Abstract

References (7)