Research ArticleOpen AccessGoogle Scholar indexed
Data Processing of Fault Recorder in Power System
School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan, China
School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan, China
School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan, China
- 1 School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan, China
- 2 School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan, China
- 3 School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan, China
Energy and Power Engineering·Volume 09 (2017)·Pages 46–52·Published 6 April 2017·DOI10.4236/epe.2017.94B006
Copy link · social · email
Abstract
This article studies the fault recorder in power system and introduces the Comtrade format. Andituses C++ programming to read recorded fault data and adopts Fourier analysis and symmetrical component method to filter and extract fundamental waves. Finally the effectiveness of the data processing method introduced in this paper is verified by CAAP software.
KeywordsFault RecorderRead and Process Recorded Fault DataResult Verification
- Lin, Y.L. (2005) TheAnalysis and Research of Recorded Fault Data. North China Electric Power University.
- (1987) Northeast and Southwest Electric Power Design Institute of Ministry of Electric Power Industry, Principle and Application of Fault Recorder, Electric Power Industry Press.
- 553-94 DL/T. People's Republic of China 220kV~500kV Power System Fault Dynamic Recording Technical Guidelines.
- Cai,C.L., Ge, X., Xu, J.J.andNi, Y.(2009) Analysis, Display and Analysis of Data Files In ComTradeFormat.Metallurgical Automation.
- Guo, Z.H.(2011) Analysis Method and Software Design of Power Fault Recording Data. Hunan University.
- GB/T 22386-2008/IEC 60255-24.2001. General format of People's Republic of China Power System Transient Data Exchange.
- (2005) Power Systems Relay Committeeof theIEEE Power Engineering Society, IEEE Standard Common Format for Transient Data Exchange (COMTRADE) for Power Systems, IEEE Std C37.111TM;- (R2005), New York,USA.
- Phadke,A.G., Chainnrm,J.A. and Jodice. COMTRADE:ANew Standard for Common Format for Transient Data Exchange.IEEE Transactions on Power Delivery,7.
- He, J.L., Li, Y.L., Dong, X.Z. and Li, B. (2010) Principle of Relay Protection. China Electric Power Press.
- Mou, L.H. andJin, M. (2007) Analysis of Microcomputer Based Protection Fourier Algorithm. Automation of Electric Power System.
- He, Y.Z. and Wen, Z.Y. (2002) Power system analysis Third Edition, Huazhong University of Science and Technology Press.
- Bermu'dez,O.E.(2006) Computational Tool for Advanced Analysis of Fault Recordings.Transmission & Distribution Conference and Exposition:Latin America.