Research ArticleOpen AccessGoogle Scholar indexed
Permanent Fault Identification Method for Single-Phasea Adaptive Reclosure of UHVAC Transmission Line
College of Electrical Power, Inner Mongolia University of Technology, Huhhot, China
College of Information Engineering, Inner Mongolia University of Technology, Huhhot, China
College of Electrical Power, Inner Mongolia University of Technology, Huhhot, China
- 1 College of Electrical Power, Inner Mongolia University of Technology, Huhhot, China
- 2 College of Information Engineering, Inner Mongolia University of Technology, Huhhot, China
- 3 College of Electrical Power, Inner Mongolia University of Technology, Huhhot, China
Energy and Power Engineering·Volume 09 (2017)·Pages 149–154·Published 6 April 2017·DOI10.4236/epe.2017.94B018
Copy link · social · email
Abstract
In order to avoid the UHVAC (Ultra High Voltage Alternating Current) transmission line with shunt reactor fault voltage smaller problems, through the analysis of single-phase permanent fault when tripping phase terminal voltage characteristics, this paper presents a fault phase voltage signal of the two order derivative and the original signal ratio of a new method for steady-state frequency discrimination single-phase permanent fault. The principle of this method is simple, and it can avoid the problem that the fault voltage caused by the installation of shunt reactor is small. The adaptability and correctness of the proposed method are verified by a large number of simulations.
KeywordsAdaptive ReclosurePermanent FaultSteady State Component Frequency
- Bai, X. andZheng, W.J. andLi, G.Q.(2015) Study on Electromagnetic Transient Problem under Asymmertric Faults of EHV/UHV. Power Technology,139,1751-1751.
- Ge, Y.Z.(1984) Method of distinguishing between instant and permanent faults during automatic. Journal of Xi’AnJiaoTong University, 18,23-31. https://doi.org/10.1016/j.epsr.2006.04.006
- Elkalashy, N.I. and Darwish, H.A. and Taalab, A.I. (2007) An Adaptive Single Pole Autoreclosure Based on Zero Sequence Power.Electric Power Systems Research,77,438-446.
- Wang, Z.P. andLiu, H.F. andXu, Y. (2006) Criterion for Determining Fault Nature in Adaptive Single-Phase Reclosing for Shunt Compensated EHV/UHV Transmission lines. Power System Technology, 30, 29-34.
- Li, B.T. and Li, Y.L.(2009) A New Criterion for Adaptive Single Pole Auto-Reclosureof Ehv Transmission Lines with Shunt Reactor Compensation. Automation of Electric Power Systems, 33,48-54.
- Suo, N.J.L., Sun, D.D. andFu, W. (2006) Identification of Permanent Faults for Single-Phase Auto-Reclosureon Transmission Lines with Shunt Reactors. Proceeding of the CSEE,26,75-81.
- Shang, L.Q. andBai, W.Z. and Cheng G. (2008) Fault Nature Identification for Single-Phase Adaptive Reclosureon Transmission Lines with Shunt Reators. Automation of Electric Power Systems, 32,81-84.
- Suo, N.J.L. and Song, G.B. and Shao, W.Q. (2007) Identification of Permanent Faults Based on Differential Current Protection for Transmission Lines with Two Shunt Reactors. Automation of Electric Power Systems,31,56-60.
- Suo, N.J.L. and Shao, W.Q. andSong, G.B. (2009) Study on Single-Phase Adaptive Reclosure Scheme Based on Parameter Identification. Proceeding of the CSEE, 29,48-54.
- Suo, N.J.L. andJia, M.L.H. andSong, G.B.(2008) Permanent Fault Identification Method Based on Capacitance Parameter.Journal of Xi’AnJiaoTong University, 42,708-712.
- Nie, H.Z.,Dong, S. and Li, T.Y., et al. (2005) Single-phase Adaptive Auto-Reclosure Based on Fuzzy Neural Network. Power System Technology, 29,75-79.
- Yang, W., Peng, L. and Zhang, J.F. (2005) ADapativeautoreclosure of Single Phase Based on FNN. Relay, 33,66-70.
- Wang Q.Q., Wang H.F. and Lin, D. (2015) An Identification Method of Single-Phase Permanent Fault at Transmission Lines with Shunt Reators. Automation of Electric Power Systems,39,101-106.