DC Emergency Power Control Strategy for AC/DC Multi-Channel Interconnected System
- 1 State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology, Wuhan, China
- 2 Central China Branch of State Grid Corporation of China, Wuhan, China
- 3 China Electric Power Research Institute, Beijing, China
- 4 Central China Branch of State Grid Corporation of China, Wuhan, China
- 5 Central China Branch of State Grid Corporation of China, Wuhan, China
- 6 State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology, Wuhan, China
Abstract
Inter-regional transmission line fault often results in power flow transferring, tie-line overloading and system islanding. Traditional control methods such asgenerator tripping and load shedding are costly, and also have undesirable impacts on theloadside. In this paper, a new emergency power control strategy is proposed for multi-channel interconnected system by using the overload capacity of non-fault DC lines. First of all, the capacity of emergency power control can be acquired by critical transmission power of a certain tie-line for stability. Secondly, the shortest electric distance can be calculated by Dijkstra algorithm, and then the priority of emergency control of the DC lines can be obtained by the entropy weight method. When the inter-regional transmission power decreases and the effect of single DC line emergency control is poor, the multi-channel cooperative emergency control strategy is proposed to ensure the system stability. Simulation results verify the effectiveness of the method proposed.
- Fang, Y.J. (2011) Analysis on Trends in Emergency Control Technology of Cross- Regional Interconnected Power System. Automation of Electric Power Systems, 15, 1-5, 77.
- Xie, H.F., Zhang, Y. and Xia, C.G. (2008) Study of UHV Emergency DC Power Support Strategy. Electric Power Automation Equipment, 8, 1-7.
- Zheng, C., Miao, T. and Ma, S.Y. (2016) Transient Stability Identification and Emergency Control Based on the Convex Characteristic of the Key Branch’s Disturbed Trajectory. Proceedings of the CSEE, 10, 2600-2610.
- Siddiqui, S.A., Verma, K., Niazi, K.R. and Fozdar, M. (2015) Artificial Neural Network Based Early Detection of Real-Time Transient Instability for Initiation of Emergency Control through Wide-Area Synchrophasor Measurements. International Conference on Computer, Communication and Control (IC4), Indore, 1-6.
- Wang, K., Yang, S. and Yao, J. (2011) Multi-Circuit HVDC System Emergency DC Power Support with Reactive Control. Power Systems Conference and Exposition (PSCE), 2011 IEEE/PES, 1-5. https://doi.org/10.1109/psce.2011.5772475
- Zhang, K.J., Yin, X.G., Chen, D.S. and Zhang, Z. (2008) Dynamic Simulation Experiments for Internal Fault Protection of Large Hydro-Generators. Automation of Electric Power Systems, 6, 41-45, 90.
- Xie, H.F., Zhang, Y., Lin, L.X., Zhong, Q. and Deng, Q.S. (2010) Emergency DC Power Support Control Based on Time-Optimal Control and Auto-Disturbance Rejection Control. Transactions of China Electrotechnical Society, 8, 145-153, 173.
- Chen, J., Liu, D.C., Liao, Q.F. and Liu, J.K. (2013) Assessment Index of Emergency DC Power Mutual Support for HVDC Transmission System with Multiple Sending Ends. Power System Technology, 9, 2416-2421.
- Zhang, J., Song, X.F. and Xue, F. (2013) Study of HVDCs Emergency Power Support Strategy Based on Multiple Principles. Proceedings of Chinese Society for Electrical Engineering in 2013.
- Wang, J.M., Sun, H.D., Zhang, J., Ren, D.W., Yin, Y.H. and Bu, G.Q. (2012) Stability Characteristics and Coordinated Control Strategy of Interconnected Grid Integrated with UHVDC Transmission Line from Jinping to Sunan. Power System Technology, 12, 66-70.
- Li, Y.K., Lv, F.P., Jiang, K., Chen, X. and Hu, Y.P. (2010) Method for Power System Operation Mode Combination Based on Shortest Electrical Distance. Power System Protection and Control, 15, 24-27, 37.
- Wang, H.X., Liu, R., Zhao, C.H. and Li, W.D. (2008) Power Loss Allocation Based on Power Flow Tracing With Consideration of the Electrical Distance between Buses. Power System Technology, S2, 196-201.