Improving the Performance of Photovoltaic Power Plants with Determinative Module for the Cooling System
- 1 Department of Energy and Electrical Automation Engineering of the Polytechnic School, University of S ão Paulo Affiliation, São Paulo, Brazil
- 2 Department of Energy and Electrical Automation Engineering of the Polytechnic School, University of S ão Paulo Affiliation, São Paulo, Brazil
- 3 Department of Energy and Electrical Automation Engineering of the Polytechnic School, University of S ão Paulo Affiliation, São Paulo, Brazil
- 4 Department of Energy and Electrical Automation Engineering of the Polytechnic School, University of S ão Paulo Affiliation, São Paulo, Brazil
Abstract
The objective of this work is to analyze and evaluate the impact of cooling systems on photovoltaic modules (for electricity generation), applied at a pilot Testing Facility. The results obtained during this step are used as input in order to determine the best model to be applied at a real-scale Photovoltaic Power Plant (PVPP). This methodology is based on the monitoring and supervision of the operating temperature of commercial photovoltaic modules (PV), both with and without cooling systems, as well as on the study of the water supply design of the cooling system applied on a micro photovoltaic power plant which is connected to the commercial network. Through the analysis of the data, we observed that photovoltaic modules with cooling systems always operate at lower temperatures than the ones without cooling systems. During the testing period, the operating temperatures of the photovoltaic modules without cooling systems were above 60 o C (with a maximum temperature equaling 68.06 o C), whereas the maximum temperatures registered on the sensors of the model “A” were 43.55 o C and 44.75 o C, and the ones registered on the sensors of the model “B” were 46.76 and 48.33 o C. Therefore, we conclude that the photovoltaic module with the cooling system model “A” is the most suitable for large-scale application, since it was the only model to present temperatures lower than the nominal operating condition temperature (NOCT) of the cell (47 o C ± 2 o C).
- de Souza Martins, H.H.T. (2004) Metodologia qualitativa de pesquisa. Educacao e Pesquisa, 30, 289-300. https://doi.org/10.1590/S1517-97022004000200007
- ANEEL (2013) Desenvolvimento de Equipamento de Usina Solar Fotovoltaica com Sistema Ativo de Arrefecimento para maior Rendimento na Geracao de Eletricidade. Projeto Estratégico de Pesquisa e Desenvolvimento, ANEEL PE-0061-0037.
- SunEdison (2012) MEMC SilvantisTM P290 Modulo. Data Sheet_Q2 2012. SunEdison, Maryland Heights, St. Louis County, Missouri,
- KSB (2007) KSB Hydrobloc P500 monofásica 220V: Data Sheet No. A2748/49.8P/6. KSB, Frankenthal.
- Novus (2014) Termorresistências Pt100. http://www.novus.com.br/downloads/Arquivos/folheto_pt100.pdf
- Novus (2015) Manual de Instrucoes Field Logger.
- Flir (2010) Termovisores Compactos: Características dos Termovisores FLIR i5 eFLIR i7. Flir Systems, Wilsonville.
- Marion, B., Adelstein, J., Boyle, K., Hayden, H., Hammond, B., Fletcher, T., Canada, B., Narang, D., Shugar, D., Wenger, H., Kimber, A., Mitchell, L., Rich, G. and Townsend, T. (2015) Performance Parameters for Grid-Connected PV Systems. Proceedings of the 31st IEEE Photovoltaic Specialists Conference and Exhibition, Lake Buena Vista, 3-7 January 2005, Article ID: 8478977.
- Silva, V.O., Veiga Gimenes, A.L.V., Ribeiro Galvao, L.C. and Morales Udaeta, M.E. (2015) Study, Verification and Selection of Cooling System Model for PV Modules with Verification Prototype. Proceedings of the EU PVSEC, Hamburg, 14-18 September 2015, 2153-2158.
- Junior, H. de S.M., Cavalcante, R.L., Galhardo, M.A.B. and Macedo, W.N. (2012) Aplicacao de Energia Solar Fotovoltaica—Um estudo de Caso na Regiao Amazonica. Revista Geonorte, 2, 1303-1309.