A Generic Battery Model and Its Parameter Identification
- 1 Energy, Ming and Environment Research Centre, National Research Council of Canada, Vancouver, Canada
- 2 Energy, Ming and Environment Research Centre, National Research Council of Canada, Vancouver, Canada
- 3 Energy, Ming and Environment Research Centre, National Research Council of Canada, Vancouver, Canada
- 4 Energy, Ming and Environment Research Centre, National Research Council of Canada, Vancouver, Canada
Abstract
A new dynamic model is developed in this paper based on the generic MATLAB battery model. The battery capacity is expressed as a function of the self-discharge rate, the discharge current, the cycling life and the temperature of the battery. The dependence of the model parameters on cycle life and temperature are estimated from the first order approximation. The detailed procedures and formula to extract the model parameters are presented and the extraction relies only on the discharge curves at two different discharge currents, at two different life cycles, and at two different temperatures. These discharge curves are typically provided in the battery manufacturer’s datasheet. The proposed model is verified for both nickel-metal hydride and lithium-ion batteries by comparing the calculated discharge curves with the results from the generic MATLAB model. The model is further validated for the Sinopoly lithium-ion battery (SP-LFP1000AHA) by comparing the model results with the discharge curves from the manufacturer’s datasheet at different discharge currents, different cycling numbers, and different temperatures. Simulation results show that the new model can correctly predict voltage separation beyond the nominal zone while maintaining the same level of accuracy as the generic MATLAB model in the exponential and nominal zones.
- Xu, X., Bishop, M., Oikarinen, D.G. and Hao, C. (2016) Application and Modeling of Battery Energy Storage in Power System. CSEE Journal of Power and Energy Systems, 2, 82-90. https://doi.org/10.17775/CSEEJPES.2016.00039
- Nejad, S., Gladwin, D.T. and Stone, D.A. (2016) A Systematic Review of Lumped- Parameter Equivalent Circuit Models for Real-Time Estimation of Lithium-Ion Battery States. Journal of Power Sources, 316, 183-196. https://doi.org/10.1016/j.jpowsour.2016.03.042
- Ramadesigan, V., Northrop, P.W.C., De, S., Santhanagopalan, S., Braatz, R.D. and Subramanian, V.R. (2012) Modeling and Simulation of Lithium-Ion Batteries from a Systems Engineering Perspective. Journal of the Electrochemical Society, 159, R31-R45. https://doi.org/10.1149/2.018203jes
- Fotouhi, A., Auger, D.J., Propp, K., Longo, S. and Wild, M. (2016) A Review on Electric Vehicle Battery Modeling: From Lithium-Ion toward Lithium-Sulphur. Renewable and Sustainable Energy Reviews, 56, 1008-1021. https://doi.org/10.1016/j.rser.2015.12.009
- Baccouche, I., Jemmali, S., Manai, B., Omar, N. and Amara, N.E.B. (2017) Improved OCV Model of a Li-Ion NMC Battery for Online SOC Estimation Using the Extended Kalman Filter. Energies, 10, 764. https://doi.org/10.3390/en10060764
- Shepherd, C.M. (1965) Design of Primary and Secondary Cells—Part 2. An Equation Describing Battery Discharge. Journal of Electrochemical Society, 112, 657-664. https://doi.org/10.1149/1.2423659
- Tremblay, O., Dessaint, L.-A. and Dekkiche, A.-I. (2007) A Generic Battery Model for the Dynamic Simulation of Hybrid Electric Vehicles. Vehicle Power and Propulsion Conference, Arlington, 9-12 September 2007, 284-289. https://doi.org/10.1109/VPPC.2007.4544139
- Hartmann II, R.L. (2008) An Aging Model for Lithium-Ion Cells. PhD Thesis, The Graduate Faculty of The University of Akron, Akron.
- Hartley, T. and Jannette, A.G. (2005) A First Principles Battery Model for the International Space Station. AIAA, 2005, 1037.
- Ahmed, R., Gazzarri, J., Onori, S., Habibi, S., Jackey, R., Rzemien, K., Tjong, J. and LeSage, J. (2015) Model-Based Parameter Identification of Healthy and Aged Li-Ion Batteries for Electric Vehicles. SAE International Journal of Alternative Powertrains, 4, 233-247.
- Mathworks.com (2017) https://www.mathworks.com/
- Tremblay, O. and Dessaint, L.-A. (2009) Experimental Validation of a Battery Dynamic Model for EV Applications. World Electric Vehicle Journal, 3, 289-298.