Aquaponic systems require energy in different forms, heat, solar radiation, electricity etc. Typical actuator components of an aquaponic system include pumps, aerators, heaters, coolers, feeders, propagators, lights, etc., which need electrical energy to operate. Hybrid Energy Systems (HES) can help in improving the economic and environmental sustainability of aquaponic systems with respect to energy aspects. Energy management is one of the key issues in operating the HES, which needs to be optimized with respect to the current and future change in generation, demand, and market price, etc. In this paper, a Decision Support System (DSS) for optimal energy management of an aquaponic system that integrates different energy sources and storage mechanisms according to priorities will be presented. The integrated model consists of photovoltaic and solar thermal modules, wind turbine, hydropower, biomass plant, CHP, gas boiler, energy and heat storage systems and access to the power grid and district heating. The results show that the proposed method can significantly increase the utilization of HES and reduce the exchange with the power grid and district heating and consequently reduce running costs.
Kusakana, K. (2015) Operation Cost Minimization of Photovoltaic Diesel Battery Hybrid Systems. Energy, 85, 645-653. https://doi.org/10.1016/j.energy.2015.04.002
Kusakana, K. (2016) Optimal Scheduling for Distributed Hybrid System with Pumped Hydro Storage. Energy Conversion and Management, 111, 253-260. https://doi.org/10.1016/j.enconman.2015.12.081
Islam, R., Al Mamun, K. and Amanullah, M. (2017) Smart Energy Grid Design for Island Countries. In: Challenges and Opportunities Green Energy and Technology, Springer, USA. https://doi.org/10.1007/978-3-319-50197-0
Hassan, Q., Jaszczur, M. and Abdulateef, J. (2016) Optimization of PV/WIND/DIESEL Hybrid Power System in HOMER for Rural Electrification. Journal of Physics: Conference Series, 745, Article ID: 032006. https://doi.org/10.1088/1742-6596/745/3/032006
Liu, L.Q. and Liu, C.X. (2013) Feasibility Analyses of Hybrid Wind-PV-Battery Power System in Dongwangsha, Shanghai. Przegląd Elektrotechniczny, 1, 239-242.
Moghaddam, I.G., Saniei, M. and Mashhour, E. (2016) A Comprehensive Model for Self-Scheduling an Energy Hub to Supply Cooling, Heating and Electrical Demands of a Building. Energy, 94, 157-170. https://doi.org/10.1016/j.energy.2015.10.137
India (2016) The MNRE Introduces a Policy For Hybrid Solar-Wind Power Projects Highlights of the Draft Wind—Solar Hybrid Policy, 2016.
Dhakad, U. and Sharma, V. (2017) A Comprehensive Mathematical Modelling: Hybrid Energy Generation Systems Used for Non-Approachable Area Like Hills and Desert. International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, 6, 827-841.
Bhandari, B., Poudel, S.R., Lee, K.-T. and Ahn, S.-H. (2014) Mathematical Modeling of Hybrid Renewable Energy System: A Review on Small Hydro-Solar-Wind Power Generation. International Journal of Precision Engineering and Manufacturing-Green Technology, 1, 157-173. https://doi.org/10.1007/s40684-014-0021-4
Venkata, S., Vulusala, G. and Sreedhar, M. (2017) Application of Superconducting Magnetic Energy Storage in Electrical Power and Energy Systems: A Review. International Journal of Energy Research, 42, 358-368.
Bhandari, B., Poudel, S.R., Lee, K.T. and Ahn, S.H. (2014) Mathematical Modeling of Hybrid Renewable Energy System: A Review on Small Hydro-Solar-Wind Power Generation. International Journal of Precision Engineering and Manufacturing-Green Technology, 1, 157-173. https://doi.org/10.1007/s40684-014-0021-4
Ru, Y., Kleissl, J. and Martinez, S. (2013) Storage Size Determination for Grid-Connected Photovoltaic Systems. IEEE Transactions on Sustainable Energy, 4, 68-81. https://doi.org/10.1109/TSTE.2012.2199339
Khelif, A., Talha, A., Belhamel, M. and Hadj, A. (2012) Arab Feasibility Study of Hybrid Diesel-PV Power Plants in the Southern of Algeria: Case Study on AFRA Power Plant. International Journal of Electrical Power & Energy Systems, 43, 546-553. https://doi.org/10.1016/j.ijepes.2012.06.053
Ngan, M.S. and Tan, C.W. (2012) Assessment of Economic Viability for PV/Wind/Diesel Hybrid Energy System in Southern Peninsular Malaysia. Renewable and Sustainable Energy Reviews, 16, 634-647. https://doi.org/10.1016/j.rser.2011.08.028
Rehman, S. and Al-Hadhrami, L.M. (2010) Study of a Solar PV-Diesel-Battery Hybrid Power System for a Remotely Located Population near RAFHA, Saudi Arabia. Energy, 35, 4986-4995. https://doi.org/10.1016/j.energy.2010.08.025
Ibrahim, H., Younès, R., Basbous, T., Ilinca, A. and Dimitrova, M. (2011) Optimization of Diesel Engine Performances for a Hybrid Wind-Diesel System with Compressed Air Energy Storage. Energy, 36, 3079-3091. https://doi.org/10.1016/j.energy.2011.02.053
IEA (International Energy Agency) (2011) Co-Generation and Renewables, Solutions for a Low-Carbon Energy Future. www.iea.org/Publications/Freepublications
Chicco, G. and Mancarella, P. (2009) Matrix Modelling of Small Scale Trigeneration Systems and Application to Operational Optimization. Energy, 34, 261-273. https://doi.org/10.1016/j.energy.2008.09.011
Chicco, G. and Mancarella, P. (2009) Distributed Multi-Generation: A Comprehensive View. Renewable and Sustainable Energy Reviews, 13, 535-551. https://doi.org/10.1016/j.rser.2007.11.014
Hashim, H., Douglas, P., Elkamel, A. and Croiset, E. (2005) Optimization Model for Energy Planning with CO2 Emission Considerations. Industrial & Engineering Chemistry Research, 44, 879-890. https://doi.org/10.1021/ie049766o
Koeppel, G. and Andersson, G. (2009) Reliability Modeling of Multi-Carrier Energy Systems. Energy, 34, 235-244. https://doi.org/10.1016/j.energy.2008.04.012
Benato, A., Stoppato, A., Mirandola, A. and Destro, N. (2014) Optimal Design and Management of a Cogeneration System with Energy Storage. Proceedings of ECOS 2014 (Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems), Turku, Finland, 15-19 June 2014, 1-12.
Dagdougui, H., Minciardi, R., Ouammi, A., Robba, M. and Sacile, R. (2012) Modeling and Optimization of a Hybrid System for the Energy Supply of a “Green” Building. Energy Conversion and Management, 64, 351-363. https://doi.org/10.1016/j.enconman.2012.05.017
Love, D.C., Uhl, M.S. and Genello, L. (2015) Energy and Water Use of a Small-Scale Raft Aquaponics System in Baltimore, Maryland, United States. Aquacultural Engineering, 6, 19-27. https://doi.org/10.1016/j.aquaeng.2015.07.003
Karimanzira, D. (2016) Chapter 5 Model Based Decision Support Systems. In: Rauschenbach, T., Ed., Modeling, Control and Optimization of Water Systems, Springer-Verlag, Berlin, Heidelberg, 185-220.
Notton, G., Muselli, N., Poggi, P. and Louche, A. (2002) Decentralized Wind Energy Systems Providing Small Electrical Loads in Remote Areas. Fuel and Energy Abstracts, 43, 202. https://doi.org/10.1016/S0140-6701(02)85860-X
Rodolfo, B.A. and Jos, L. (2008) Multi-Objective Design of PV-Wind-Diesel-Hydrogen-Battery Systems. Renewable Energy, 33, 2559-2572. https://doi.org/10.1016/j.renene.2008.02.027
Villalva, M., Gazoli, J. and Filho, E. (2009) Comprehensive Approach to Modeling and Simulation of Photovoltaic Arrays. IEEE Transactions on Power Electronics, 24, 1198-1208. https://doi.org/10.1109/TPEL.2009.2013862
Naghizadeh, R., Jazebi, S. and Vahidi, B. (2012) Modelling of Full Photovoltaic Systems Applied to Advanced Control Strategies. International Review on Modeling and Simulation, 5, 1780-1790.
Tsai, H.-L., Tu, C.-S. and Su, Y.-J. (2016) Modeling of Photovoltaic Source, Modeling of Photovoltaic Systems Using MATLAB. 3985.
El Fadara, A., Mimeta, A. and Pérez-Garcíab, M. (2009) Study of an Adsorption Refrigeration System Powered by Parabolic Trough Collector and Coupled with a Heat Pipe. Renewable Energy, 34, 2271-2279. https://doi.org/10.1016/j.renene.2009.03.009
Fuchs, E.F. and Masoum, M. (2011) Power Conversion of Renewable Energy Systems. Springer, Berlin.
Hernandez, G.A.M., Mansoor, S.P. and Jones, D.L. (2012) Modelling and Controlling Hydropower Plants: International Review on Modeling and Simulation. Springer, London.
Ramos-Paja, C.A., Carrejo, C.E., Simon-Muela, A., Estibals, B. and Alonso, C. (2010) Modeling of Full Photovoltaic Systems Applied to Advanced Control Strategies. Renewable Energy and Power Quality Journal (ICREPQ), 712-717.
Wächter, A. (2002) An Interior Point Algorithm for Large-Scale Nonlinear Optimization with Applications in Process Engineering. Ph.D. Thesis, Carnegie Mellon University, Pittsburgh, PA, USA.
Franke, R. and Arnold, E. (1999) The Solver Omuses/HQP for Structured Large-Scale Constrained Optimization: Algorithm, Implementation and Example Application. http://hqp.sourceforge.net/index.html
Kloas, W., Gro, R., Baganz, D. and Rennert, B. (2012) A New Concept for Aquaponic Systems to Improve Sustainability, Increase Productivity, and Reduce Environmental Impacts. Aquaculture Environment Interactions, International Review on Modeling and Simulation, 7, 179-192.
Energie GmbH, K.W. and Co, K.G. (2016) Smartblock 16s. Datenblatt Hocheffizienz-BHKW. Hg. v. KW Energie GmbH & Co. KG. https://www.smartblock.eu/de/wp-content/uploads/sites/8/2016/04/KWE_smartblock_16s_NG_20160406.pdf
Heckert Solar (2017) Polykristallines PV-Modul. NeMo P. Hg. Heckert Solar. http://www.heckertsolar.com/de/produkte/solarmodule/solarmodul-nemor-60-p.html
Gupta, M. and Chandra, P. (2002) Effect of Greenhouse Design Parameters on Conservation of Energy for Greenhouse Environmental Control. Energy, 27, 777-794. https://doi.org/10.1016/S0360-5442(02)00030-0